Comparing Properties of North American Manufactured Particleboard and Medium Density Fiberboard - Part I: Particleboard
نویسندگان
چکیده
منابع مشابه
Properties of medium - density particleboard from saline Athel wood
The Athel tree, Tamarix aphylla (L), can potentially be used as a biomass crop to help manage saline subsurface drainage water in arid land irrigated agriculture. In this study, Athel wood was used to manufacture medium-density particleboard with an aim of developing new applications for the saline wood. The research investigated the effects of different types of adhesives, particle sizes, bark...
متن کاملEVALUATION OF THE MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM CANOLA (Brassica napus) STRAWS
This study examined possible feasibility of canola (Brassica napus) straws in the production of particleboard. Three-layer experimental particleboards with density 0,7 g/cm3 were manufactured using different canola straws particle ratios (0%, 25%, 50%, 75% and 100%) and urea formaldehyde (UF) adhesive. Modulus of elasticity (MOE), modulus of rupture (MOR), internal bond strength (IB), water abs...
متن کاملSelected properties of particleboard panels manufactured from rice straws of different geometries.
The objective is to evaluate the primary mechanical and physical properties of particleboard made from hammer-milled rice straw particles of six different categories and two types of resins. The results show the performance of straw particleboards is highly dependent upon the straw particle size controlled by the opening size of the perforated plate inside the hammer-mill. The static bending an...
متن کاملa comparative study on creep behavior of wood flour-polypropylene composite, medium density fiberboard (mdf) and particleboard
the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...
متن کاملNano-Wollastonite in Particleboard: Physical and Mechanical Properties
The effects of wollastonite nanofibers on the physical and mechanical properties of particleboard were studied. Nano-wollastonite (NW), with the size range of 30 to 110 nm, was applied at 5, 10, 15, and 20%, based on the dry weight of wood chips, and compared with control specimens. Two application methods of NW were used: surface application (SA) and internal application (IA). Density was kept...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2015
ISSN: 1930-2126
DOI: 10.15376/biores.10.3.6014-6031