Coiling simulations of medium-Mn sheet steels using dilatometry
نویسندگان
چکیده
منابع مشابه
Vanadium in Cold-rolled Sheet Steels
In hot rolled products, which are the subject of other presentations here, vanadium has been used for many years in high strength products, often in combination with other microalloying additions such as niobium or titanium. Vanadium can provide important contributions via both precipitation strengthening and ferrite grain refinement (due to austenite conditioning during thermomechanical proces...
متن کاملEvaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution
One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...
متن کاملULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...
متن کاملCharacterization of Structural Relaxation in Inorganic Glasses Using Length Dilatometry
................................................................................................................ ii DEDICATION............................................................................................................ vi ACKNOWLEDGEMENTS ..................................................................................... vii LIST OF TABLES ........................................
متن کاملSimultaneous determination of titanium and molybdenum in alloy steels using derivative spectrophotometry in neutral micellar medium
A simple, selective and sensitive spectrophotometric method has been developed for the individual and simultaneous determination of Ti(IV) and Mo(VI) using salicylaldehyde p-hydroxybenzoylhydrazone (SAPHBH) in presence of Triton X100, without any prior separation. Beer’s law is obeyed between 0.15-2.0 and 0.20-2.51 μgmL concentration of Ti(IV) and Mo(VI) at 470 and 410 nm, respectively. The mol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/723/1/012020