Coat of Alumina Sheet with Needle-like Mullite
نویسندگان
چکیده
منابع مشابه
Mullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملRecycling of Coal Fly Ash for the Fabrication of Porous Mullite/Alumina Composites
Coal fly ash with the addition of Al₂O₃ was recycled to produce mullite/alumina composites and the camphene-based freeze casting technique was processed to develop a controlled porous structure with improved mechanical strength. Many rod-shaped mullite crystals, formed by the mullitization of coal fly ash in the presence of enough silicate, melt. After sintering at 1300-1500 °C with the initial...
متن کاملSol-gel synthesis and characterization of alumina-15%mullite composite nanopowder
Homogeneous distribution of mullite in the matrix of alumina can be obtained through sol-gel method. In this work, nanopowder of alumina-mullite composite was synthesized with high homogeneity and high purity. So aluminum chloride hexahydrate and tetraethyl orthosilicate were used instead of alumina or mullite nanopowder. Studying the simultaneouse thermal analysis (STA) of mullite precursor re...
متن کاملFunctionally Graded Alumina/Mullite Coatings for Protection of Silicon Carbide Ceramic Components from Corrosion
The deposition of carbon from ethylene in the presence of methyl-trichlorosilane or tetrachlorosilane is investigated in this study. Ex-periments are carried out in a hot-wall tubular reactor coupled to amicrobalance for continuous monitoring of the reaction rate. Thingraphite plates and refractory wires are employed as deposition sub-strates. The experimental results sh...
متن کاملMullite/Alumina Mixtures for Use as Porous Matrices in Oxide Fiber Composites
Weakly bonded particle mixtures of mullite and alumina are assessed as candidate matrixes for use in porous matrix ceramic composites. Conditions for the deflection of a matrix crack at a fiber-matrix interface are used to identify the combinations of modulus and toughness of the fibers and the matrix for which damage-tolerant behavior is expected to occur in the composite. Accordingly, the pre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1990
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.98.1114