Characterization of Solidification Process in Sn-Ag Alloys Using Interrupted Tests
نویسندگان
چکیده
منابع مشابه
Rapid solidification behavior of Zn-rich Zn–Ag peritectic alloys
Rapid solidification experiments, including laser remelting, melt-spinning and wedge casting, were carried out to investigate the rapid solidification behavior of Zn-rich Zn–Ag peritectic alloys containing up to 9.0 at% Ag. For comparison, Bridgman solidification experiments of the same alloys were also carried out for growth velocities ranging from 0.02 to 4.82 mm/s, which were lower than that...
متن کاملInfluence of the thermal history and composition on the melting/solidification process in Sn-Ag-Cu solders
Presented work shows the results of DSC measurement for six Sn based solders. The alloys Sn96Ag4, Sn99Cu1, Sn97Cu3, Sn96.5Ag3Cu0.5, Sn95.5Ag3.8Cu0.7 and Sn63Pb37 were studied in the temperature range from room temperature up to 400◦C. The transformation temperatures for melting as well as for solidification were influenced by the composition and thermal history of the alloys. The thermal histor...
متن کاملthe washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests
در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است
15 صفحه اولStructural and Mechanical Characterization of Austempered Cu - Sn Ductile Iron Alloys
The effect of heat treatment and alloying elements of copper and tin on the microstructure and mechanical properties of austempered ductile cast iron alloys is investigated. The austenitizing temperature of 890°C, the isothermal transformation (austempering) temperatures of 285, 335 and 375°C, and austempering times of 15, 30, 75 and 150 minutes are studied. The alloying elements of copper and ...
متن کاملInfluence of electric current pulses on the solidification of Cu-Bi-Sn immiscible alloys
Continuous solidification experiments were carried out with Cu-Bi-Sn alloys under the effects of Electric Current Pulses (ECPs). A model describing the microstructure evolution was developed. The formation of the microstructure in the continuously solidified alloys was calculated. The calculations demonstrated that ECPs mainly affect the solidification process through changing the energy barrie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals
سال: 2009
ISSN: 1880-6880,0021-4876
DOI: 10.2320/jinstmet.73.732