Characterization of Nb2O5-Ni Coating Prepared by DC Sputtering

نویسندگان

چکیده

The Nb2O5-Ni coating was processed using DC sputtering on structural steel and study characterization of composite SEM/EDS inspection indicated clearly perfect incorporation Nb2O5 within the nickel rich. Increasing in surface roughness decreasing average diameters particles were obtained for coated compared with uncoated from AFM analysis, addition, microhardness test thickness showed that increasing hardness value to 163 HV - Ni 132 samples, also to155 coatings increased significantly samples.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Magneto-Optical Properties of Pr, Ni- and Ce, Ni-Substituted YIG Epitaxial Films Prepared by Sputtering

Films of Y,R,(Fe, Ni),O,, @=PI, Ce) have been epitaxially grown in situ on G&G%O,, ( 1 1 1 ) substrates by rf sputtering. Faraday rotation of Ce, Ni:YIG film decreased with valence change of Ce ions from 3+ to 4+ induced by Ni substitution. On the other hand, PI, Ni:YIG films showed negative Faraday rotation in the visible which slightly increases in negative sign for Ni substitution. Magneto-o...

متن کامل

CrNx Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study

CrNx (0 ≤ x ≤ 0.91) films synthesized using highpower pulsed magnetron sputtering, also known as high-power impulse magnetron sputtering (HiPIMS), have been compared with those made by conventional direct-current (dc) magnetron sputtering (DCMS) operated at the same average power. The HiPIMS deposition rate relative to the DCMS rate was found to decrease linearly with increasing emission streng...

متن کامل

Characterization and Corrosion of Bcc-tantalum Coating Deposited on Aluminum and Steel Substrate by Dc Magnetron Sputtering

CHARACTERIZATION AND CORROSION OF BCC-TANTALUM COATING DEPOSITED ON ALUMINUM AND STEEL SUBSTRATE BY DC MAGNETRON SPUTTERING by Chirag Joshi Tantalum is one of the most versatile highly refractory corrosion-resistant metals. Tantalum coating can be used as an effective corrosion barrier if it is continuous, free from defects and it adheres well to the substrate. A DC magnetron sputtering techniq...

متن کامل

Dependences of the activation volumes on Ar sputtering pressure in CoÕPt multilayers prepared by dc magnetron sputtering

We investigated the wall-motion and nucleation activation volumes of Co/Pt multilayer films prepared by dc magnetron sputtering under various Ar sputtering pressures. Delicate analysis of time-resolved domain evolution patterns reveals that the nucleation activation volume is generally smaller than the wall-motion activation volume in all the samples, which is consistent with the nucleation-dom...

متن کامل

Study of vanadium doped ZnO films prepared by dc reactive magnetron sputtering at different substrate temperatures.

ZnO films doped with vanadium (ZnO:V) have been prepared by dc reactive magnetron sputtering technique at different substrate temperatures (RT-500 degrees C). The effects of the substrate temperature on ZnO:V films properties have been studied. XRD measurements show that only ZnO polycrystalline structure has been obtained, no V2O5 or VO2 crystal phase can be observed. It has been found that th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Ma?allat? al-handasat? wa-al-tikn?l??iy?

سال: 2021

ISSN: ['1681-6900', '2412-0758']

DOI: https://doi.org/10.30684/etj.v39i4a.1902