Characterization of Hot Cracking in Multi-Pass Weld Metal of High Manganese Austenitic Steel
نویسندگان
چکیده
منابع مشابه
Effect of Nonmetallic Inclusions on Steel Welds Metal Hot Cracking
B. Z orc, W elding I nstitute, L jubljana, S lovenia; M . I mamović, Un iversity of Zenica, Faculty of Mechanical Engineering, Zenica, B a nd H; A. Nagode, B. Kosec, L. Kosec, University of Ljubljana, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia; A. Stoić, I. Samardžić, University of Osijek, Mechanical Engineering Faculty, Slavonski Brod, Croatia Intercrystally distributed n...
متن کاملHeat treatment of high manganese type X57MnAl27-5 austenitic steel
In the paper, the influence of heat treatment parameters on microstructure and mechanical properties of high manganese type X57MnAl27-5 austenitic steel was investigated. The as-forged bar with diameter of 15 mm were underwent a saturation process at six different temperatures. The microstructural changes of austenite and the influence of heat treatment on the mechanical properties were conside...
متن کاملAn evaluation of weld metal nitrogen retention and properties in 316LN austenitic stainless steel
A series of tests were conducted using varying levels of nitrogen and helium in a conventional argon shielding gas when welding 316LN austenitic stainless steel. The outcome was that a 15 per cent nitrogen addition to the argon shielding gas had the most significant effect on increasing the weld metal nitrogen. Subsequent additions of helium to the argon 15 per cent nitrogen shielding gas had v...
متن کاملMulti-Scale Modeling of the Impact Response of a Strain-Rate Sensitive High-Manganese Austenitic Steel
*Correspondence: Demircan Canadinc, Rumeli Feneri Yolu, Sariyer, Istanbul, Turkey e-mail: [email protected] A multi-scale modeling approach was applied to predict the impact response of a strain rate sensitive high-manganese austenitic steel. The roles of texture, geometry, and strain rate sensitivity were successfully taken into account all at once by coupling crystal plasticity and finite e...
متن کاملEffect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel
In the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (Fe-30Mn-4Al-4Si-0.5C) was investigated. X-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. The res...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2020
ISSN: 0288-4771,2434-8252
DOI: 10.2207/qjjws.38.297