Characterization of carbon fiber reinforced PLA composites manufactured by fused deposition modeling
نویسندگان
چکیده
منابع مشابه
In-vitro evaluation of Polylactic acid (PLA) manufactured by fused deposition modeling
BACKGROUND With additive manufacturing (AM) individual and biocompatible implants can be generated by using suitable materials. The aim of this study was to investigate the biological effects of polylactic acid (PLA) manufactured by Fused Deposition Modeling (FDM) on osteoblasts in vitro according to European Norm / International Organization for Standardization 10,993-5. METHOD Human osteobl...
متن کاملAdditive Manufacturing of Cfrp Composites Using Fused Deposition Modeling: Effects of Carbon Fiber Content and Length
Additive manufacturing (AM) technologies have been successfully applied in various applications. Fused deposition modeling (FDM), one of popular AM techniques, is most widely used method for manufacturing of plastic materials. Due to the poor strength properties of pure plastic materials, there is a critical need to improve mechanical properties for FDMfabricated pure plastic parts. One of the ...
متن کاملCarbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملProcessing of Carbon Fiber Reinforced Composites by Three Dimensional Photolithography
The reinforcement of photoresins with continuous carbon fibers is discussed in this paper. The processing was conducted in an automated desktop photolithography unit (ADPU) developed and built in-house. Continuous fibers were added in situ to the photoresin to obtain composite samples containing over 20 vol% of the fibers. The tensile strength of these composites improved by at least a factor o...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part C: Open Access
سال: 2021
ISSN: 2666-6820
DOI: 10.1016/j.jcomc.2021.100112