Characteristics of TiN Particle Dispersed Magnesium Composite Materials Produced by Hot Extrusion
نویسندگان
چکیده
منابع مشابه
Effect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملStudy on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion
In the present work, an experimental study was done to prepare Acrylonitrile-Butadiene-Styrene matrix composite reinforced by Nano-silica particles. The hot extrusion method was utilized here to fabricate the composite specimens used for flexural and compression tests. In order to identify the effect of SiO2 content and extrusion temperature, 12 experiments have been carried out and ...
متن کاملNano Dispersed Metal-Ceramic Composite Materials of the Ni-SiO2 system
In the organic field effect transistors (OFETs) generation, the silicon gate oxide is 1-2 nm thick. A shrinking of this thickness down to less than 1 nm for the next generation will led to a couple of orders of magnitude increase in tunnelling as well as leakage currents. NiO-SiO2 can be used in a variety of devices, such as in circuit boards and detectors, including sensors, due to its porous ...
متن کاملCharacterization of poly(caprolactone)/hydroxyapatite composite scaffolds produced by a melt extrusion additive manufacturing technique
P. Coimbra, J. P. Almeida, A. C. Santos*, S. Pereira, H. P. Cunha, B. Oliveiros, C. Capela, T. F. Viana, N. M. Alves and M. M. Figueiredo CIEPQPF, Chemical Engineering Department, University of Coimbra, Coimbra, Portugal Biophysics and Biomathematics Institute, IBILI-Faculty of Medicine, University of Coimbra, Coimbra, Portugal Department of Mechanical Engineering, ESTG, Polytechnic Institute o...
متن کاملHot Melt Extrusion Technique
Various approaches have been adopted to address this including preparation of solid dispersions and solid solutions. Hot-melt extrusion is an efficient technology for producing solid molecular dispersions with considerable advantages over solvent-based processes such as spray drying and co-precipitation. Hot-melt extrusion has been demonstrated to provide sustained, modified, and targeted drug ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2012
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.59.598