Characteristics of externally pressurized porous ceramics air bearings.
نویسندگان
چکیده
منابع مشابه
A study on the characteristics of externally pressurized air bearings
In this study the direct numerical method is applied to solve the perturbed Reynolds" equation. To solve it the perturbed dimensionless mass f low rate is used as the boundary condition under the inherently compensated restrictor. The dynamic characteristics of a rotor supported in the externally pressurized air bearings, such as stiffness and damping coefficients, are analyzed, and as a result...
متن کاملShape optimization of pressurized air bearings
Use of externally pressurized air bearings allows for the design of mechanical systems requiring extreme precision in positioning. One application is the fine control for the positioning of mirrors in large-scale optical telescopes. Other examples come from applications in robotics and computer hard-drive manufacturing. Pressurized bearings maintain a finite separation between mechanical compon...
متن کاملCharacterization of Porous Graphite Air Bearings
Byron R. Knapp, Brian P. O’Connor, Eric R. Marsh Machine Dynamics Research Lab The Pennsylvania State University, University Park, PA Introduction As the demand for higher precision machine tools and inspection equipment grows, there is a need for more precise bearing systems. The error motions of bearings with mechanical contact are dominated by the geometric and surface finish errors of their...
متن کاملAC Microdischarges in Porous Ceramics
Generation of microdischarges inside porous ceramics by AC high voltage has been investigated. Electrical and optical measurements were performed to explore the physical properties of the microdischarges. The effect of pore size, discharge power and gas mixture on the discharge properties and development is described. Introduction Research of various types of non-thermal plasmas generated by el...
متن کاملElastic properties of model porous ceramics ∗
The finite element method (FEM) is used to study the influence of porosity and pore shape on the elastic properties of model porous ceramics. The Young’s modulus of each model was found to be practically independent of the solid Poisson’s ratio. At a sufficiently high porosity, the Poisson’s ratio of the porous models converged to a fixed value independent of the solid Poisson’s ratio. The Youn...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1989
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.55.750