CFD Modeling of Reactor Concepts to Avoid Carbon Deposition in Pyrolysis Reactions

نویسندگان

چکیده

Abstract Methane pyrolysis in an externally heated tubular reactor inevitably ends with clogging of the reactor. Thin molten metal wall films protect walls from carbon depositions. A falling film and a rotating are investigated by CFD simulation. The results show considerable advantages compared to vertical An alternative route for production methane is implementation exothermic chlorination reaction. concept involves inflow inert gas at reactant inlet through porous ensure that reaction takes place center, thus, largely reducing deposits.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling Spray Pyrolysis Deposition

The deposition of a thin tin oxide film allows for the manufacture of modern gas sensors. Spray pyrolysis deposition is used to grow the required thin films, as it can be seamlessly integrated into a standard CMOS processing sequence. A model for spray pyrolysis deposition is developed and implemented within the Level Set framework. Two models for the topography modification due to spray pyroly...

متن کامل

CFD Modeling of Gas-Liquid Hydrodynamics in a Stirred Tank Reactor

Multiphase impeller stirred tank reactors enhance mixing of reacting species used in a variety of chemical industries. These reactors have been studied based on Computational Fluid Dynamics (CFD) that can be used in the analysis, design and scale up of these reactors. Most of the researches done in this area are limited to single phase reactors, and a few remaining two phase flow investigat...

متن کامل

CFD modeling and control of a steam methane reforming reactor

This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...

متن کامل

CFD Modeling of the Feed Distribution System of a Gas-Solid Reactor

Granular flow simulation using CFD has received a lot of attention in recent years. In such cases, CFD is either, coupled with Discrete Element Method (DEM) techniques for appropriate incorporation of inter-particle collisions, or the Eulerian CFD approach is used in which granular particles are treated as they were fluid. In the present study, a CFD analysis was performed...

متن کامل

MODELING OF ASPHALTENE DEPOSITION IN PIPELINES

This paper is concerned with asphaltene deposition in fluid flowing through pipelines. Brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. The thermo-physical properties of the fluid were obtained from Iranian oil fields. A model was used in the pipeline deposition modeling to predict...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Chemie Ingenieur Technik

سال: 2021

ISSN: ['0009-286X', '1522-2640']

DOI: https://doi.org/10.1002/cite.202000234