منابع مشابه
Influence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide
Tribological characteristics of fine-grained WC–8 wt%Ni with different surface finishing conditions corresponding to sequential wire electrical discharge machining (wire-EDM) or grinding were investigated by performing dry reciprocating sliding experiments on TE77 pin-on-plate equipment with WC–6 wt%Co as mating material. Surface finishes and wear surfaces were characterized using surface topog...
متن کاملDevelopment of Creep-Resistant Tungsten Carbide Copper Cemented Carbide
Fine-grained tungsten carbide copper (WC-Cu) cemented carbide was sintered via spark plasma sintering at 1773K using a fine WC powder with a mean particle size of 0.11 mm. The mechanical properties were compared with tungsten carbide cobalt (WC-Co) cemented carbide and a binderless WC-sintered material. The Vickers hardness and fracture toughness obtained by the indentation fracture method for ...
متن کاملinvestigation of machining parameters in wire electrical discharge machining (wedm) on the surface roughness & cutting speed of tungsten carbide
surface roughness is one of the most important parameters that plays very critical role in determining the quality of engineering components. a good surface quality resulting in improve of fatigue strength, corrosion and wear resistance of the workpiece. on the other hand, increasing cutting speed and decreasing time of machining are desirable for manufacturers in order to reduce costs and incr...
متن کاملParametric Study of Dry WEDM Using Taguchi Method
Wire Electrical Discharge Machining (WEDM) is a non-traditional thermo-electric process capable of machining hard materials of highly complex three dimensional shapes. In this paper, the dry WEDM experimentation is conducted using oxygen as a dielectric medium. The deionized water is replaced by the oxygen as a dielectric medium to ameliorate the environmental impact in the machining surroundin...
متن کاملDevelopment of Cemented Carbide Tool of Reduced Rare Metal Usage
Cemented carbides, including coated cemented carbides, account for 75% of the cutting tools market because of their features such as high hardness, toughness, and the responsiveness to iron, through the use of tungsten carbide for their main hard phases and cobalt for their bonding metals. The consumption of tungsten continues to increase as the amount of carbide tool production increases with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kako Gakkaishi
سال: 2006
ISSN: 1881-0888,0387-754X
DOI: 10.2526/jseme.40.146