Cavitation Erosion Resistances of Cast Iron and Chromium Films Plated on Cast Iron under Various Conditions
نویسندگان
چکیده
منابع مشابه
Tribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملCast Iron Metallurgy
Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...
متن کاملPretreatment of Gray Cast Iron for Hard Chromium Electroplating (RESEARCH NOTES)
From the standpoint of processing, hard chromium layer plate may be applied to steels, cast iron, aluminum and nickel base alloys. Cast iron can be plated provided that the surface is capable of conducting the required current and is reasonably free of voids, pits, gross silicate inclusions, and massive segregation. There are many difficulties arising from graphite phase and deposition of hydro...
متن کاملEffect of Chromium and Titanium on Structure and Properties of White Cast Iron
Joint effect of chromium and titanium on structure and properties of hard castings is investigated in present work. It is determined that titanium neutralizes carbide-forming effect of chromium in the investigated concentration intervals. In the presence of titanium, the effect of chromium on hardness of samples is lower as compared to its individual effect. Therefore, addition of only chromium...
متن کاملDelamination Wear Mechanism in Gray Cast Irons
An investigation of the friction and sliding wear of gray cast iron against chromium plated cast irons was carried out on a newly constructed reciprocating friction and wear tester. The tests were the first to be done on the test rig under dry conditions and at the speed of 170 cm/min, and variable loads of 20-260 N for a duration of 15 min. to 3 hours. The gray cast iron surfaces worn by a pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1965
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.14.833