Carbonitride Dissolution and Austenite Grain Growth in a High Cr Ferritic Heat-resistant Steel

The Effect of Precipitate Evolution on Austenite Grain Growth in RAFM Steel

To study the effects of various types of precipitates and precipitate evolution behavior on austenite (size and phase fraction) in reduced activation ferritic/martensitic (RAFM) steel, RAFM steel was heated to various austenitizing temperatures. The microstructures of specimens were observed using optical microscopy (OM) and transmission electron microscopy (TEM). The results indicate that the ...

Modeling of Ni Diffusion Induced Austenite Formation in Ferritic Stainless Steel Interconnects

Research on abnormal grain growth in reversely transformed austenite structure

Strong Ferritic – Steel Welds

There are many steels which are stronger than 2000 MPa, with toughness values exceeding 100 MPa m and which have been in commercial service for many decades. Examples include the marageing alloys and carbide–free bainitic steels. By contrast, welding consumables with a proof strength in excess of 1000 MPa are few and far between. This is because whereas wrought steels can be thermomechanically ...

Theory for Hydrogen Desorption in Ferritic Steel

After a concise review of the analytical models available for the interpretation of thermal desorption rates for hydrogen effusion from steel, a numerical method that incorporates the essence of local equilibrium and detrapping kinetics has been implemented to account for the real complexity of practical experiments. For example, the model permits the treatment of multiple kinds of traps, uses ...