Buckling and strength analysis of panels with discrete stiffness tailoring

Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube

In this study, the buckling behavior of moderately thick Carbon Nano-Tube (CNT)-reinforced spherical composite panels subjected to both uniaxial and biaxial loads is examined. The uniform and various kinds of functionally graded distributions of the CNT are considered. The mechanical properties of the nanocomposite panels are estimated using the modified rule of mixture. Based on the first-orde...

Buckling Analysis of Panels and Comparative Study on ABS and DNV Rules

In this study, buckling analysis of panel types of marine and offshore structural components with initial imperfection under the combined action of lateral pressure and axial compression is carried out. The governing differential equations for thin and moderately thick shells are developed in terms of components of the displacement field. The governing ordinary differential equations are then d...

Free Vibration and Buckling Analysis of Sandwich Panels with Flexible Cores Using an Improved Higher Order Theory

In this paper, the behavior of free vibrations and buckling of the sandwich panel with a flexible core was investigated using a new improved ‎high-order sandwich panel theory. In this theory, equations of motion were formulated based on shear stresses in the core. First-order shear deformation theory was ‎applied for the procedures. In this theory, for the first time, incompatibility problem of...

Ultimate Strength Analysis of Normal and High Strength Concrete Wall Panels with Varying Opening Configurations

Local Buckling of Web-Core and Foam-Core Sandwich Panels

Sandwich construction is widely accepted as a method of construction especially in the aircraft industry. It is a type of stressed skin construction formed by bonding two thin faces to a thick core, the faces resist all of the applied edge loads and provide all or nearly all of the required rigidities, the core spaces the faces to increase cross section moment of inertia about common neutral ax...