Blackening zinc-nickel alloy plating and corrosion/heat resist effects.
نویسندگان
چکیده
منابع مشابه
Electroless Nickel Plating on Magnesium Alloy
he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...
متن کاملZinc-Alloy-Plating for Corrosion Protection
Zinc represents the most effective and economic corrosion protection especially for steel base materials. Improved corrosion resistance can be achieved by alloying zinc with small amounts (around 1 Yo) of transition metal elements like Co, Ni and Fe. Zn-Fe and Zn-Co alloys containing up to 1.5 Yo of the transition metal were plated using an alkaline and acidic electrolyte respectively. Zn-Ni al...
متن کاملNickel Plating and Electroforming
The material presented in this publication has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Development Institute, its members, staff and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of a...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jitsumu Hyomen Gijutsu
سال: 1988
ISSN: 1884-3417,0368-2358
DOI: 10.4139/sfj1970.35.480