Bioleaching of Zinc from Blast Furnace Cast House Dust

نویسندگان

چکیده

Metallurgical dusts are by-products from steel manufacturing. The high iron content of cast house dust (~64%) makes this by-product an interesting feedstock alternative. Therefore, its return into the internal steelmaking circuit, specifically in sinter plant, is a common practice industry. However, fraction also contains heavy metals, as zinc. As result re-entry zinc process, concentration blast furnace flue gas increases. This prevents full recirculation process despite relatively (~35%), thus causing part to end landfill. goal study was investigate usage bacteria, such sulfur oxidizing Acidithiobacillus thiooxidans or and ferrooxidans, leach undesirable element while preventing leaching iron, by adjusting addition avoiding, at same time, accumulation solid fraction. Experiments proved that co-culture A. ferrooxidans can effectively metallurgical dusts, maintaining concentrations material. influence elemental on efficiencies reached shown, since higher removal were achieved with increasing concentrations. Maximum ~63% (w/w) enrichment ~7% remaining residue 15 g/L for 125 g/L.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Studying and Improving Blast Furnace Cast Iron Quality

Т. K. Balgabekov, D. K. Issin, A. Z. Issagulov, A. Z. Akashev, Zh. D. Zholdubayeva Karaganda State Technical University, Karaganda, Kazakhstan B. M. Kimanov, Zh. Abishev Chemical-Metallurgical Institute, Karaganda, Kazakhstan B. D. Issin, Tomskij politehnicheskij university, Tomsk, Rossia In the article there are presented the results of studies to improve the quality of blast furnace cast iron...

متن کامل

A KINETIC STUDY ON THE CARBOTHERMIC REDUCTION OF ZINC OXIDE FROM ELECTRIC ARC FURNACE DUST

In the present study, reduction of zinc oxide from the pellets made of steelmaking electric arc furnace dust has been investigated. Effects of such parameters as the type of carbon material (graphite, coke and charcoal) as well as time and temperature on the reduction reaction have been examined. The reduced (dimensionless) time method was applied to perform a kinetic analysis of the system. Ex...

متن کامل

Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

متن کامل

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

متن کامل

Influence of the Moisture Content on the Flowability of Blast Furnace Dust

In this paper the influence of the moisture content on the flow characteristics of blast furnace dust is investigated. The flowability of granular material is essential for the design and operation of dust separators, transport equipment and storage silos. Two blast furnace dust samples from different blast furnaces were investigated. The moisture content was adapted for measurement with the sh...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Minerals

سال: 2023

ISSN: ['2075-163X']

DOI: https://doi.org/10.3390/min13081007