Bending-Induced Cross-Sectional Deformation of Cold-Formed Steel Channel-Section Beams
نویسندگان
چکیده
منابع مشابه
Local Buckling Tests on Cold-Formed Steel Beams
C and Z sections are two of the most common cold-formed steel shapes in use today. Accurate prediction of the bending performance of these sections is important for reliable and efficient cold-formed steel structures. Recent analytical work has highlighted discontinuities and inconsistencies in the American Iron and Steel Institute ~AISI! and Canadian Standards Association ~S136! design provisi...
متن کاملDistortional Buckling Tests on Cold-Formed Steel Beams
Failure in cold-formed steel beams is generally initiated by one of three instabilities: local, distortional, or lateral-torsional buckling. For cold-formed steel joists, purlins, or girts, when the compression flange is not restrained by attachment to sheathing or paneling, distortional buckling may be the predominant failure mode. Experimental results on cold-formed steel beams with unrestrai...
متن کاملImpact of cross-section stability on cold-formed steel member stiffness and ductility
The objective of this paper is to provide work towards design methods to predict both the loss of stiffness and the available ductility for cold-formed steel members subject to cross-section deformations resulting from local and distortional buckling. Existing design specifications provide some guidance on how to predict the stiffness of cold-formed steel members, but no guidance on their avail...
متن کاملOn Cold-Formed Steel Construction
Powder-actuated (also referred to as low velocity or powder-driven) fasteners are commonly used to attach cold-formed steel framing members, usually a track, to a concrete or structural steel support. Although commonly used, their behavior is less well understood than other fasteners such as screws, bolts and welds. The AISI Cold-Formed Steel Design Manual does not explicitly address powder act...
متن کاملComputational Modeling of Cold-formed Steel
The objective of this paper is to summarize recent research and experiences with computational modeling of cold-formed steel conducted within the author’s research group at Johns Hopkins University. This admittedly biased view of computational modeling focuses primarily on the use of the semi-analytical finite strip method and collapse modeling using shell finite elements. Issues addressed incl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Civil Engineering
سال: 2021
ISSN: 1687-8094,1687-8086
DOI: 10.1155/2021/8897756