Behavior of FRP Bars-Reinforced Concrete Slabs under Temperature and Sustained Load Effects
نویسندگان
چکیده
منابع مشابه
Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-03)
This paper reports on the key features of the “Guide for the Design and Construction of Concrete Reinforced with FRP Bars” issued by the American Concrete Institute (ACI). For new construction, FRP bars have been used as the internal reinforcement in concrete members to replace conventional steel rebars for a host of reasons. The principles for design and construction were first established and...
متن کاملDynamic and Static Behavior of Hollow-Core FRP-Concrete-Steel and Reinforced Concrete Bridge Columns under Vehicle Collision
This paper presents the difference in behavior between hollow-core fiber reinforced polymer-concrete-steel (HC-FCS) columns and conventional reinforced concrete (RC) columns under vehicle collision in terms of dynamic and static forces. The HC-FCS column consisted of an outer FRP tube, an inner steel tube, and a concrete shell sandwiched between the two tubes. The steel tube was hollow inside a...
متن کاملFlexural Behavior of Lightweight Concrete Beams Reinforced with GFRP Bars and Effects of the Added Micro and Macro Fiber
This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...
متن کاملBehaviour of fibre reinforced concrete slabs
This paper presents a comparison of the properties of concrete slabs when two types of fibres are added. One specimen had no fibres and acted as a control specimen. The remaining four specimens had steel and polypropylene fibres added in the volumetric ratio of 0.5% and 1.0%. The dimensions of the slab specimens were 820×820×80 mm and were supported by four rollers at their edges. A displacemen...
متن کاملA Proposal of Guidelines for Bending Resistance of Frp Rc Members in Fire Situation
Several building codes are available for the design of concrete structures reinforced with FRP; nevertheless knowledge on their structural behavior in case of fire is lack and no reliable design method is available. The experimental data available in the literature about the behavior of fiber-reinforced composite materials as well as of concrete slabs reinforced with FRP bars or grids at high t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2014
ISSN: 2073-4360
DOI: 10.3390/polym6030873