Basic Characteristics of Dielectric Barrier Discharge Reactor Using Anodic Porous Alumina for NOx Removal
نویسندگان
چکیده
منابع مشابه
Characteristics of Dielectric Barrier Discharge Reactor for Material Treatment
This work reports the development of atmospheric pressure plasma reactor with dielectric barrier discharge DBD for material treatment. The DBD discharge has been generated in planar geometry reactor powered by ac voltage provided by conventional high voltage transformer. The dielectric barrier consisted of two glass slabs, which cover both reactor electrodes. The air discharge gap between the d...
متن کاملA Numerical Study of the Sour Gas Reforming in a Dielectric Barrier Discharge Reactor
In this paper, using a one-dimensional simulation model, the reforming process of sour gas, i.e. CH4, CO2, and H2S, to the various charged particles and syngas in a dielectric barrier discharge (DBD) reactor is studied. An electric field is applied across the reactor radius, and thus a non-thermal plasma discharge is formed within the reactor. Based on the space...
متن کاملRemoval properties of diesel exhaust particles by a dielectric barrier discharge reactor.
The removal properties of diesel exhaust particles (DEP) were investigated using an engine exhaust particle size spectrometer (EEPS), field emission-type scanning electron microscopy (FE-SEM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). DEP were treated using a dielectric barrier discharge (DBD) reactor installed in the tail pipe of a diesel engine, and a model DBD reactor fed...
متن کاملInfluence of NO Concentration on Removal Efficiency in Multipoint-to-Plane Electrode Dielectric Barrier Discharge Reactor
An influence of initial nitrogen monoxide (NO) concentration on removal efficiency with a multipoint-to-plane electrode dielectric barrier discharge (DBD) reactor was investigated experimentally. Several hundreds ppm NO was diluted with nitrogen and oxygen gas mixture (N2:O2=9:1) and was fed to the DBD reactor as a diesel exhaust simulated gas. The experimental results were evaluated using a si...
متن کاملFabrication of a porous anodic alumina membrane
With the aim of developing a process for surface enlargement on an electrode for measuring brain activity attempts have been made to fabricate a porous anodic alumina membrane directly on the electrode. The porous membrane was intended to be used as scaffold for deposition of an electrically conducting polymer on the electrode surface. A silicon wafer with gold electrodes was the base onto whic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2009
ISSN: 0915-1869
DOI: 10.4139/sfj.60.174