Automatic Design of Synchronous Reluctance Motors Focusing on Barrier Shape Optimization
نویسندگان
چکیده
منابع مشابه
Optimum Design Parameters for Synchronous Reluctance Motors
A series of synchronous reluctance motors (RSM) are analysed using finite element methods. The amount of iron in each rotor is kept the same. It is shown that the saliency ratio is not only dependent on the flux guide reluctance factor but also on the position or span of flux guides. It is also shown that an axially laminated design may not be an optimum configuration due to large number of flu...
متن کاملPole Shape Optimization of Permanent Magnet Synchronous Motors Using the Reduced Basis Technique
In the present work, an integrated method of pole shape design optimization for reduction of torque pulsation components in permanent magnet synchronous motors is developed. A progressive design process is presented to find feasible optimal shapes. This method is applied on the pole shape optimization of two prototype permanent magnet synchronous motors, i.e., 4-poles/6-slots and 4-poles-12slots.
متن کاملDesign Optimization of Synchronous Reluctance Motor for low Torque Ripple
The aim of this paper is to optimize the design of multiple flux barriers Synchronous reluctance motor in order to smooth the torque profile without rotor skewing. A new strategy is proposed by modelling the particular optimal design problem as mixed integer constrained minimization of a suitable objective function. The procedure has allowed to optimize the rotor shape for minimum torque ripple...
متن کاملOptimal design of switched reluctance motors
The fundamental theory of the switched reluctance motor is presented with a number of new equations. It is used to show how the practical development of a design calculation should proceed, and this leads to a discussion of physical characteristics required to achieve satisfactory performance and to reduce acoustic noise. The paper makes a few generic observations on the characteristics of succ...
متن کاملSimple Design Approach for Low Torque Ripple and High Output Torque Synchronous Reluctance Motors
The rotor design of Synchronous Reluctance Motors (SynRMs) has a large effect on their efficiency, torque density and torque ripple. In order to achieve a good compromise between these three goals, an optimized rotor geometry is necessary. A finite element method (FEM) is a good tool for the optimization. However, the computation time is an obstacle as there are many geometrical parameters to b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Industry Applications
سال: 2015
ISSN: 0093-9994,1939-9367
DOI: 10.1109/tia.2014.2345953