Atomic disorder and phase transformation inL12‐Ni3Al by mechanical milling
نویسندگان
چکیده
منابع مشابه
Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique
In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...
متن کاملEffect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملthe investigation of synthesis and phase transformation in molybdenum disilicide by mechanical alloying
the molybdenum dicilicide is an intermetallic compound with two allotropies tetragonal ?-mosi2 and hexagonal ?-mosi2.the ?-mosi2 phase is established to 1900 ?c and ?-mosi2 phase from 1900 to 2050 ?c. this material has considerable properties that provide different applications in different industries such as air-space industry and gas turbines. the molybdenum synthesis can be down in various w...
متن کاملDISORDERING OF FeAl BY MECHANICAL MILLING
Point defect concentrations in milled samples of stoichiometric FeAl were obtained by Mssbauer measurements. Mssbauer spectra consisted of a single absorption dip with broadening attributed to unresolved hyperfine interactions. A local environment model was used to analyze spectra that allowed for defect-induced changes in monopole interactions at Fe probe atoms due to elementary defects in t...
متن کاملHydrogen evolution activity of NiMo-MoO2 produced by mechanical milling
In this study, mechanical alloying was done by a high-energy planetary ball milling technique. A mixture of NiO and MoO3 and graphite powders were used as initial materials. After milling of powder mixture with 40 wt.% additional graphite, a temperature of 400, 550 and 1000 °C for 1 h was considered for the heat treatment of powder mixture. Also, powder mixtures containing 60, 80 and 100 wt.% a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Physics
سال: 1995
ISSN: 0021-8979,1089-7550
DOI: 10.1063/1.359974