Applying remote handling attributes to the ITER neutral beam cell monorail crane

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Intense Diagnostic Neutral Beam for ITER

An intense pulsed diagnostic neutral beam (IDNB) is proposed to enable active spectroscopic diagnostics on ITER. The proposed intense neutral beam source will employ a magnetically insulated diode (MID) ion source, consisting of a plasma anode and a virtual cathode. Clean, intense (~25 A/cm) hydrogen or deuterium neutral beams will be generated with an energy up to 125 keV/amu. A short pulse (1...

متن کامل

Dust Removal Experiments for ITER Blanket Remote Handling System

To reduce maintenance workers’ dose rate caused by activated dust adhering to the ITER blanket remote handling system (BRHS), dust must be removed from BRHS surfaces. Dust that adheres to the top surface of the BRHS rail from cyclic loading of the vehicle manipulator is considered to be the most difficult dust to remove. Dust removal experiments were conducted to simulate the materials, conditi...

متن کامل

Mobile Robot Navigation for Remote Handling operations in ITER

This paper briefly summarizes the work related with mobile robotics developed by IST on the field of remote handling operations to be carried out in the International Thermonuclear Experimental Reactor (ITER) by a transfer casks system. The transport operations of contaminated and heavy loads inside ITER buildings requires optimized trajectories. Approaches of path planning and trajectory optim...

متن کامل

Predictive simulations of ITER including neutral beam driven toroidal rotation

discharges are carried out for the 15 MA high confinement mode ͑H-mode͒ scenario using PTRANSP, the predictive version of the TRANSP code. The thermal and toroidal momentum transport equations are evolved using turbulent and neoclassical transport models. A predictive model is used to compute the temperature and width of the H-mode pedestal. The ITER simulations are carried out for neutral beam i...

متن کامل

Overview of diagnostics on ITER neutral beam test facility

ITER operation relies on heating neutral beam injectors (HNB) based on negative ion deuterium beams accelerated at 1 MeV, with up to one hour 17 MW power, uniform intensity and low divergence. A neutral beam test facility is being built at Consorzio RFX to demonstrate the feasibility of a prototype injector with such demanding specifications and to optimize its performances. It comprises SPIDER...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Fusion Engineering and Design

سال: 2013

ISSN: 0920-3796

DOI: 10.1016/j.fusengdes.2012.10.006