Analysis of Bond Behavior of FRP-Confined Concrete Piles Based on Push-Out Test
نویسندگان
چکیده
منابع مشابه
Behavior of FRP-Confined Concrete-Filled Steel Tube Columns
This paper presents the results of an experimental study into the behavior of concrete-filled steel tube columns confined by fiber-reinforced polymer (FRP). Eleven columns were tested to investigate the effects of the FRP layer number, the thickness of the steel tube and concrete strength on their load capacity and axial deformation capacity. The experimental results indicated that the FRP wrap...
متن کاملBehavior of FRP-Confined Reactive Powder Concrete Columns under Eccentric Loading
Fiber reinforced Polymers (FRP) have widely used for the purposes of enhances strength and ductility of concrete columns. Proper design of such hybrid columns, however, requires a better recognition of the behavior of concrete columns confined with FRP. In this paper, the influence of FRP thickness, concrete compressive strength, and column size on the performance of eccentrically loaded reacti...
متن کاملBond of Frp Laminates to Concrete
Fiber reinforced polymer (FRP) laminates are being successfully used for strengthening of existing reinforced concrete structures. Bond of the FRP reinforcement to the concrete substrate is of critical importance for the effectiveness of the technique. In this project, flexural test specimens were prepared to address some of the factors expected to affect bond, namely, bonded length, concrete s...
متن کاملeffect of blood exposure on push-out bond strength of four calcium silicate based cements
introduction: the purpose of this study was to compare the push-out bond strength of white proroot mineral trioxide aggregate (mta), biodentine, calcium-enriched mixture (cem) cement and endosequence root repair material (errm) putty after exposure to blood. methods and materials: a total of 96 root dentin slices with a standardized thickness of 1.00±0.05 mm and standardized canal spaces were r...
متن کاملfabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2020
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2020/3186832