Analysis and structural optimisation of bed structure for CNC lathe based on modal strain energy sensitivity
نویسندگان
چکیده
منابع مشابه
EFFICIENCY EVALUATION OF PROPOSED OBJECTIVE FUNCTIONS IN STRUCTURAL DAMAGE DETECTION BASED ON MODAL STRAIN ENERGY AND FLEXIBILITY APPROACHES
Civil infrastructures such as bridges and buildings are prone to damage as a result of natural disasters. To understand damages induced by these events, the structure needs to be monitored. The field of engineering focusing on the process of evaluating the location and the intensity of the damage to the structure is called Structural Health Monitoring (SHM). Early damage prognosis in structures...
متن کاملfabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولA New Technique based on Strain Energy for Correction of Stress-strain Curve
Tensile stress-strain curve is of high importance in mechanics of materials particularly in numerical simulations of material deformations. The curve is usually obtained by experiment but is limited by necking phenomenon. Engineering stress-strain curve is converted to true stress-strain curve through simple formulas. The conversion, however, is correct up the point of necking. From this point ...
متن کاملAnalysis of Surface Roughness on Machining of Al-5cu Alloy in Cnc Lathe Machine
In this study, an experimental approach is presented for the measurement of the surface roughness of the machined surface produced by simple turning operation in a computer numerically controlled (CNC) Lathe. The parameters used in the experiment were reduced to three cutting parameters, cutting speed, depth of cut, feed rate. Other parameters such as tool nose radius, workpiece length, workpie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Engineering
سال: 2019
ISSN: 2051-3305,2051-3305
DOI: 10.1049/joe.2019.0091