An Alternative System for Eccentrically Braced Frames Resisting Lateral Loads
نویسندگان
چکیده
منابع مشابه
an investigation on steel knee braced frames for lateral loads
hysteretic dampers as the most practical passive control methods have improved the seismic performance of steel structures through energy dissipation induced by large inelastic deformations. among them in this paper, kbf (knee braced frames), a special form of braced frames having a diagonal brace connected to a knee element instead of beam-column joint, is investigated. in such systems, the kn...
متن کاملDevelopment of Self-Stabilizing Links for Eccentrically Braced Frames
This paper highlights aspects of the development of self-stabilizing links having tubular cross-sections for use in eccentrically braced frames (EBF’s). EBF’s utilizing this type of link could be used in bridge piers or other applications where lateral bracing to prevent lateral torsional buckling is difficult to provide. The development of design recommendations for these types of links consis...
متن کاملTubular Links for Eccentrically Braced Frames. II: Experimental Verification
This paper describes the results of an experimental study to verify proposed design requirements for eccentrically braced frame links with hollow rectangular i.e., tubular cross sections. Twelve primary link specimens and two supplementary links that have different end connections are tested. Three cross sections and four normalized link lengths are considered. Two of the cross sections have we...
متن کاملSeismic Yield Displacement Profile in Steel Eccentrically Braced Frames
Displacement-based methods are recognized as appropriate approaches to reach the goals of performance-based seismic design method. In the direct displacement-based seismic design method, the seismic yield displacement is applied as one of the important design parameters. In this paper, a new relation is suggested to determine the lateral displacement pattern at first yielding of eccentrically b...
متن کاملSeismic Behavior of Direct Displacement-based Designed Eccentrically Braced Frames
Direct Displacement-Based Design (DDBD) is a performence-based seismic design method that has been proposed and well developed over the past two decades to design RC frame structures, shear walls and bridges. In this method, the behavior of a multi-degree-of-freedom (MDOF) sysytem is approximaeted by an equivalent single-degree-of-freedom (SDOF) substitute structure. Although this method has be...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering, Technology & Applied Science Research
سال: 2019
ISSN: 1792-8036,2241-4487
DOI: 10.48084/etasr.2778