Alternative black coatings prepared on aluminium alloy 1050
نویسندگان
چکیده
منابع مشابه
Superhydrophobic and Anti-icing Coatings on Aluminium Alloy Surfaces
A superhydrophobic and anti-icing surface was prepared by consecutive immersion in boiling water and sputtering of polytetrafluoroethylene on the surface of an aluminium alloy substrate. The immersion time in boiling water plays an important role on the surface morphology and water repellency of the deposited RF-sputtered Teflon coating. The Teflon-like coating deposited on a rough surface achi...
متن کاملPVD coatings on aluminium substrates
It is well known that aluminium is today the most widely used metallic material besides steel. The mechanical characteristics of aluminium offer an increasing application field, especially where lightweight constructions are required. The demands for improved characteristics such as higher strength and greater durability are achieved by the development of new aluminium alloys. Continuous effort...
متن کاملThe Adsorption of an Epoxy Acrylate Resin on Aluminium Alloy Conversion Coatings
A thermodynamic study of the adsorption of an epoxy acrylate resin used for UV-cured coatings on two different anti corrosion pretreatments on aluminium alloys relevant to aerospace industry has been undertaken. Aluminium alloy Al2219 specimens, treated with an inorganic chromate based conversion coating (Alodine 1200S) and an organic titanium based conversion coating (Nabutan STI/310), were im...
متن کاملAnti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method
As an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. Using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. Corrosion resistance was studied in 3.5 wt.% NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...
متن کاملThe Preparation of Combined Aluminium Oxide Coatings on Aluminium Substrate
T h e prepara t ion and propert ies of combined a luminium oxide coatings have been investigated. T h e coating has been prepared in two steps. First , a luminium subs t ra te was anodically oxidized. In t he next s tep the anodized film has been coated by the sol-gel method . T h e condit ions of forming coatings wi thout shrinkage were obta ined empirically. It was found out t h a t the film ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface Engineering
سال: 2018
ISSN: 0267-0844,1743-2944
DOI: 10.1080/02670844.2018.1533202