Alkaline leaching of brannerite. Part 2: Leaching of a high-carbonate refractory uranium ore
نویسندگان
چکیده
منابع مشابه
Fungal Leaching of Manganese Ore
Bioleaching is technologically feasible for extraction of manganese from low grade ores (containing manganese less than 35% by weight). The principle involves the non-enzymatic reduction of pyrolusite [Mn(IV) oxides] to +2 oxidation state by fungi with the production of metabolites such as oxalic acid and citric acid. In the present investigation, a fungal strain, Penicillium citrinum was isola...
متن کاملInvestigation of Leaching Kinetics of Smithsonite Ore
The leaching kinetics of smithsonite ore in acetic acid solutions, an environmental friend, and natural reagent was investigated. The influence of parameters such as reaction temperature, particle size, solid-liquid ratio and acid concentration was studied in order to reveal the leaching kinetics of smithsonite ore. In this study, experimental and statistical methods were carried out in order t...
متن کاملEffect of Mechanical Activation on the Kinetics of Ammoniacal Thiosulfate Leaching of a Refractory Oxide Gold Ore
The effect of mechanical activation on the kinetics of ammoniacal thiosulfate leaching of a refractory oxide gold ore containing 2.8 ppm Au was investigated. The gold extraction of 99.81% was achieved by 16 h leaching of a sample mechanically activated for 60 minutes. The gold extraction observed for a similar reference sample without mechanical activation was only 55%. Studies revealed that le...
متن کاملQuantitative Leaching of a Nigerian Iron Ore in Hydrochloric Acid
A study on the quantitative leaching of iron ore in hydrochloric acid solution has been undertaken. The elemental composition of the iron ore was also carried out using ICP-MS technique. The major elements in the iron ore include: Fe(66.7%); Al (0.2%); Si (5.2%); Ti (0.02%) and O (28.0%). Some traces of V, Ni, Zn, Ce, Cr, La, Y and Zr were also found. The effects of contact time, acid concentra...
متن کاملVanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology
In this work, thealkaline roasting and sulfuric acid leaching processes were employed to extract vanadium from the magnetite ore of Saghand mine in central Iran. The response surface methodology based on the central composite design model was applied to optimize the parameters involved in the processes. The studied roasting parameters were temperature (900-1100 °C), sodium carbonate percentage ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hydrometallurgy
سال: 2017
ISSN: 0304-386X
DOI: 10.1016/j.hydromet.2017.08.019