منابع مشابه
Sensing Materials for Surface Acoustic Wave Chemical Sensors
Online real‐time monitoring of gases requires a miniaturized, passive, and accurate gas sensor. Surface acoustic wave (SAW) devices possess these properties which make them suitable for gas‐sensing applications. They have shown remarkable results in sensing of different gases in terms of sensitivity, selectivity, response, and recovery times. One of the important prerequisites a designer should...
متن کاملLayered Surface Acoustic Wave Chemical and Bio-Sensors
Surface acoustic wave (SAW) sensors are currently being investigated in a wide range in fields including physical, chemical and bio-sensing. The basic principle in a SAW sensor is the detection of changes in the propagation characteristics of the surface acoustic waves which are caused by perturbations on the active surface of the device. The most common situation is measuring the change in pro...
متن کاملSensors - Acoustic Wave Technology Sensors
Acoustic wave devices have been in commercial use for more than 60 years. The telecommunications industry is the largest consumer, accounting for ~3 bil lion acoustic wave filters annually, primarily in mobile cell phones and base stations. These are typically surface acoustic wave (SAW) devices, and act as bandpass filters in both the radio frequency and intermediate frequency sections of the ...
متن کاملAcoustic Wave Hydrogen Gas Sensors
Amorphous titanium dioxide (TiO2) and gold (Au) doped TiO2-based surface acoustic wave (SAW) sensors have been investigated as hydrogen gas detectors. The nanocrystal-doped TiO2 films were synthesized through a sol-gel route, mixing a Ti-butoxide-based solution with diluted colloidal gold nanoparticles. The films were deposited via spin coating onto 64◦ YX LiNbO3 SAW transducers in a helium atm...
متن کاملLead-free acoustic emission sensors.
Acoustic emission (AE) sensors have been fabricated using both soft- and hard-type lead-free (Na0.5K0.5)NbO3-based ceramics. The acoustic and electromechanical properties of the ceramics have been determined using the resonance technique. The lead-free AE sensors were calibrated using a laser source and compared to a commercial sensor. A lead zirconate titanate (PZT) 5H ceramics AE sensor has a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science
سال: 1991
ISSN: 0036-8075,1095-9203
DOI: 10.1126/science.251.4999.1372