Acidic magnetorheological finishing of infrared polycrystalline materials
نویسندگان
چکیده
منابع مشابه
Acidic magnetorheological finishing of infrared polycrystalline materials.
Chemical-vapor-deposited (CVD) ZnS is an example of a polycrystalline material that is difficult to polish smoothly via the magnetorheological finishing (MRF) technique. When MRF-polished, the internal infrastructure of the material tends to manifest on the surface as millimeter-sized "pebbles," and the surface roughness observed is considerably high. The fluid's parameters important to develop...
متن کاملPerformance Evaluation of Improved Ball End Magnetorheological Finishing Process
A novel nanofinishing process using improved ball end magnetorheological (MR) finishing tool was developed for finishing of flat as well as 3D surfaces of ferromagnetic and non ferromagnetic workpieces. In this process a magnetically controlled ball end of smart MR polishing fluid is generated at the tip surface of the tool which is used as a finishing medium and it is guided to follow the surf...
متن کاملNanoindentation hardness of particles used in magnetorheological finishing (MRF).
Knowledge of the hardness of abrasive particles that are used in polishing is a key to the fundamental understanding of the mechanisms of material removal. The magnetorheological-finishing process uses both magnetic and nonmagnetic abrasive particles during polishing. The nanohardnesses of the micrometer-sized magnetic carbonyl iron and nonmagnetic abrasive particles have been measured successf...
متن کاملMinimizing Artifact Formation in Magnetorheological Finishing of CVD ZnS Flats
LLE Review, Volume 101 35 Introduction and Motivation The development of optics for new applications is based on the use of materials that have the appropriate mechanical and optical properties. For infrared (IR) window and dome materials that protect imaging systems against damaging conditions, three main considerations are taken into account: material strength, thermal-shock resistance, and o...
متن کاملDevelopment of Magnetorheological Finishing (MRF) Process for Freeform Surfaces
One of the newly developed methods for obtaining super finished surfaces for freeform is Magnetorheological finishing (MRF). MRF is an advanced finishing process in which the grinding force is controlled by magnetic field. The material removal in MRF is governed by the magnetorheological fluid which mainly consists of carbonyl iron (CI), abrasives particles, carrier fluids and additives. MRF pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Optics
سال: 2016
ISSN: 0003-6935,1539-4522
DOI: 10.1364/ao.55.008448