Accommodation of penetrative strain during deformation above a ductile décollement
نویسندگان
چکیده
منابع مشابه
The Strain Dependence of Post-Deformation Softening during the Hot Deformation of 304H Stainless Steel
Experiments were carried out in which the dependence of the fractional softening on temperature, time and strain rate was determined in a 304H stainless steel. Three prestrain ranges were identified pertaining to three different post-deformation softening behaviors: 1) prestraining to below the DRX critical strain: strongly strain dependent softening by SRX alone with softening kinetics control...
متن کاملRotations of brittle particles during plastic deformation of ductile alloys
Experimental evidence is presented to show that significant rotations of brittle phase inclusions of a Fe-rich intermetallic phase occur during plastic deformation on an Al Mg Si base wrought aluminum alloy. The particle rotations are quantitatively characterized, for uniaxial tension, compression, torsion, and notch-tension test specimens strained to different strain levels. The particle rotat...
متن کاملDeformation path concepts in strain analysis: Applications for study of ductile shear zones
The internal fabric of a deformed rock represents the state of finite strain. In some special cases the fabrics also record the strain history of the deformed body. These special cases can profitably be utilized to compare the predictions of dynamic models and strain paths in natural deformations. In this contribution, the concept of deformation path in the study of ductile shear zones has been...
متن کاملthe strain dependence of post-deformation softening during the hot deformation of 304h stainless steel
experiments were carried out in which the dependence of the fractional softening on temperature, time and strain rate was determined in a 304h stainless steel. three prestrain ranges were identified pertaining to three different post-deformation softening behaviors: 1) prestraining to below the drx critical strain: strongly strain dependent softening by srx alone with softening kinetics control...
متن کاملDeformation T-Cup: a new multi-anvil apparatus for controlled strain-rate deformation experiments at pressures above 18 GPa.
A new multi-anvil deformation apparatus, based on the widely used 6-8 split-cylinder, geometry, has been developed which is capable of deformation experiments at pressures in excess of 18 GPa at room temperature. In 6-8 (Kawai-type) devices eight cubic anvils are used to compress the sample assembly. In our new apparatus two of the eight cubes which sit along the split-cylinder axis have been r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lithosphere
سال: 2016
ISSN: 1941-8264,1947-4253
DOI: 10.1130/l558.1