Acceleration and Deceleration Control Design of Step Motor Based on TMS320F240
نویسندگان
چکیده
منابع مشابه
Identifying and Analyzing Stop and Go Traffic based on Asymmetric Theory of Driving Behavior in Acceleration and Deceleration
Stop and go traffic that leads to oscillate traffic flow frequently is observed on congestion flow. Unexpected reasons such as lane – changing maneuvers, lower speeds of leader vehicle and moving bottleneck cause stop and go traffic and amplifying delay and environment impacts. Stop and go traffic exactly can’t be modeled by traffic models, and also car following models based on kinematic flow ...
متن کاملThe Acceleration/Deceleration Control Algorithm Based on Trapezoid-Curve Jerk in CNC Machining
In this study, we put forward an Acc/Dec control algorithm based on trapezoid-curve jerk in order to avoid step change in jerk curve. Moreover, the motion profile smooth control approach based on continuous jerk is developed in details to decrease machine tools impact according to various kinematics constraint conditions, such as the maximum acceleration, the maximum jerk, the machining program...
متن کاملUse of Acceleration-Deceleration Lanes
On the basis of various and recent research studies, it is apparent that highway designers must become more concerned with the relation ship between highway design and traffic behavior. An excellent example of current interest in highway design is the design of acceleration and deceleration lanes. In order to obtain maximum efficiency and safety in the operation of acceleration and deceleratio...
متن کاملDesign and Implementaion of Interior Permanent Magnet Synchronous Motor (IPMSM) Control based on Integral Terminal Sliding Mode Technique
Permanent Magnet Synchronous Motor because of high energy storage capability is very important in electrical drive industry. Speed control of this motor suffers from parameter variations such as variable inductance. In this paper, The Integral-Terminal Sliding Mode Control (ITSMC) method is used to control the speed (torque) along with d-axis current control. This method is like to classic slid...
متن کاملDSP-Based Field-Oriented Step Motor Control
The SMC3 motor drive has been built using an Analog Devices ADSP-2101 digital signal processor (DSP). The SMC3 is designed to work with two-phase step motors, which are permanent magnet motors with many (typically 100) poles. The firmware in the SMC3 DSP drives the step motor phase windings using field-oriented control rather than using single steps. This method derives the maximum theoretical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.08.095