Accelerating Aging of Transmission Line Porcelain Suspension Insulators by Autoclaving
نویسندگان
چکیده
منابع مشابه
Assessment of aging effects on porcelain repair systems discoloration
Introduction: The selection of porcelain is based on high biocompatibility, endurance, superficial texture and aesthetics. Nevertheless, the innate fracture charateritics of porcelain is the main cause of the intra oral fractures. Electing a suitable porcelain restorative system in terms of stability of color is important. For this reason, this study aimed to examine the color changes of common...
متن کاملDesignation of an Indicator for flashover prediction of porcelain and glass insulators based on experimental tests.
Flashover of polluted insulators in contaminated areas is one of the most important factors influencing the operation of transmission and distribution lines and finally line outages. Therefore, it is essential to prevent and detect flashover in the insulators. Hence, utilizing the insulator status monitoring systems and predicting their functions have absorbed a lot of attention over the recent...
متن کاملComposite insulators and their aging: An overview
The aging (biological deterioration) is a major problem of composite insulators now-a-days. The main thing in aging is to predict how, when and with what speed it occurs and under what conditions it can lead to failure and what overall average expected life of a composite insulator is. For this a lot of researches have been done. This review summarizes the methods of artificial field testing (a...
متن کاملA Detection Method for Transmission Line Insulators Based on an Improved FCM Algorithm
An improved segmentation Fuzzy C-Means algorithm (FCM) is proposed for the image recognition of transmission line insulators. In this paper, the improved Wiener filter algorithm is firstly used to filtrate and recover image in pre-processing. Then, the insulator image is segmented based on the improved algorithm FCM. Finally, the contour of insulator is labelled by using connected component lab...
متن کاملDecontaminating infectious laboratory waste by autoclaving.
The temperature profile of infectious laboratory waste being autoclaved was examined relative to the type of containers used in the process. A standardized waste load (1,750 +/- 4 g) placed in the container was evaluated by using a direct readout thermocouple. The sensor of the thermocouple was placed within an unused and outdated agar plate, centrally located about 5 cm from the bottom of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions on Electrical and Electronic Materials
سال: 2008
ISSN: 1229-7607
DOI: 10.4313/teem.2008.9.4.147