A triangular prism solid and shell interactive mapping element for electromagnetic sheet metal forming process
نویسندگان
چکیده
منابع مشابه
Rigid-plastic finite-element analysis of sheet-metal forming processes using a selective membrane/shell formulation
In most sheet-metal forming processes a large part of the deforming material exhibits stretch-dominant characteristics and the bending effect is found to exist only in a limited portion of the total deforming region. Thus the use of shell or continuum elements for the whole region is not economic. A selective membrane/shell (M/S) scheme is proposed which combines the layered degenerated shell e...
متن کاملDesign and manufacture a novel tool in the incremental sheet metal forming process and its effects on the process parameters
One of the methods for making prototypes is incremental forming process. In this method, the forming tool, performs a pre-programmed movement by the CNC machine and runs the desired path. This modernization process is used in the automotive, aerospace, military, medical and other industries. One of the most influential parameters in this process is forming tool. This parameter is effective in f...
متن کاملProcess Simulation for Optimizing Superplastic Forming of Sheet Metal
Superplastic forming (SPF) is conducted in a heated, pressurized die where direct monitoring of critical SPF parameters is extremely difficult. Numerical models provide a critical means of tracking the forming process, allowing the applied gas pressure to be adjusted to maintain optimum SPF behavior throughout the forming process. This paper describes how the MARC finite element code was used t...
متن کاملForming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation
In this paper, the drawing process of multi-layer sheet metal through wedge shaped die has been analyzed using stream function and upper bound method. Typically a sandwich sheet contains three layers of metal, where the outer layers are of the same thickness and material and different from those of the inner layer. In this study, a new deformation model has been introduced in which inlet and ou...
متن کاملOptimization of Process Parameters in Sheet Metal Forming
Figure 1 shows a simplified CAD representation of the tools and initial blank in the stamping process. During stamping, the metal sheet is submitted to large displacements and large elasto-plastic strains; rupture and wrinkles must be avoided, (Figures 2 and 3). The resulting part must also satisfy quality requirements regarding its geometry: after tools removing, the springback effect (Figure ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Computational Physics
سال: 2017
ISSN: 0021-9991
DOI: 10.1016/j.jcp.2017.02.014