A Theory of Compacting Metal Powder

Compacting of Metal Powders

Metal Powder-filled Polyethylene Composites. v. Thermal Properties Metal Powder-filled Polyethylene Composites. v. Thermal Properties

Thermal properties—such as thermal conductivity, thermal diffusivity, and specific heat—of metal (copper, zinc, iron, and bronze) powder-filled high-density polyethylene composites are investigated experimentally in the range of filler content 0–24% by volume. Experimental results show a region of low particle content, 0–16% by volume, where the particles are distributed homogeneously in the po...

Study on Laser Consolidation of Metal Powder

The layered manufacturing technique is one of the most effective processes for the manufacture of prototypes, tools and functional end products. Selective Laser Sintering (SLS) and Selective Laser Melting (SLM), in particular, are two of the most versatile techniques, able to cover a wide range of materials such as polymer, ceramic and metal powder. In this study, the monitoring method of proce...

applying transitivity theory to gender analysis of efl textbook: : a comparative study.

efl/esl textbooks have been regarded as essential language teaching materials with which the learners spend about 70 up to 90 percent of their class time. the important role they play and their vast use make them not only influential in learning the language but also in shaping values and attitudes. put it another way, textbooks socialize learners using their contents (i.e. texts, illustrations...

Experimental Investigation of Metal Powder Compaction without Using Lubricant

The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...