A Supercritical 250 kW Industrial Air Compressor Prototype
نویسندگان
چکیده
منابع مشابه
250 kW Flywheel with HTS Magnetic Bearing for Industrial Use
A 250 kW / 5 kWh engineering prototype Flywheel Energy Storage System (FESS) was designed, fabricated and component tested by Adelwitz Technologiezentrum GmbH (ATZ) and L-3 Communications Magnet Motor GmbH (MM). A heavy – load vertical 0.6 ton rotor is suspended totally magnetically by an HTS radial-passive bearing on the top together with a PM bearing at the bottom. Further features are the fl...
متن کاملconceptual design of a centrifugal compressor impeller for a 65 kw micro gas turbine
the aim of this study is designing the impeller of a centrifugal compressor in order to supply pressure ratio for a 65 kw micro gas turbine. first, the primary thermodynamic analysis has been conducted for the considered cycle using a home made code. herein, the compressor pressure ratio was considered to be 4. the obtained thermal efficiency was 25.64%. then, the design of micro compressor in ...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملVibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study
In this paper, the experimental vibration analysis of a single cylinder air compressor based on a hypocycloid straight line mechanism (HSM) is investigated. The HSM mechanism uses planetary gears to convert rotational motion to purely linear motion. In the conventional air compressor, the slider- crank mechanism is replaced by the HSM mechanism with appropriate counterweights. The constructed s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of System Design and Dynamics
سال: 2009
ISSN: 1881-3046
DOI: 10.1299/jsdd.3.639