A Study on Laser Weldability of Al-Si Coated 22MnB5 Steel for TWB Hot Stamping
نویسندگان
چکیده
منابع مشابه
Friction and wear behaviour of tool steels sliding against 22MnB5 steel
Boron steels are used in hot stamping process due to their good mechanical properties. During the stamping process, the dies are exposed to aggressive conditions including adhesive wear, abrasion, thermal stresses and fatigue. In the present work, QRO 90 and UNIMAX slid against 22MnB5 steel in four conditions: with and without hardening treatment and, with and without Al–10%Si coating, in order...
متن کاملCut-edge corrosion study on Al-rich metallic coated steel
Aluminium additions to metallic coatings on steel substrates have been accepted as a successful solution versus the standard zinc based coatings. The development of these products responds to the market’s demand of more versatile products, which faces the leaching effect of zinc and the rising cost of obtaining this element, among the main advantages. However, these materials show a special sen...
متن کاملA review on hot stamping
The production of high strength steel components with desired properties by hot stamping (also called press hardening) requires a profound knowledge and control of the forming procedures. In this way, the final part properties become predictable and adjustable on the basis of the different process parameters and their interaction. In addition to parameters of conventional cold forming, thermal ...
متن کاملa study on thermodynamic models for simulation of 1,3 butadiene purification columns
attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...
Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming
The use of TWB has been developed in automotive industries because of it’s advantages such as reduction in weight, cost and fuel economy of vehicles. The main objective of the peresent work is to study the effects of weld zone, diffrence in surface coating and thickness ratio on the formability of TWB composed of AISI 304, SPCC and IF steel sheets. It was found that the narrow weld zone has lit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Welding and Joining Society
سال: 2013
ISSN: 1225-6153
DOI: 10.5781/kwjs.2013.31.2.30