A strategy for enhancing shear strength and bending strength of FRP laminate using MWCNTs
نویسندگان
چکیده
منابع مشابه
Strength of arch-shaped members in bending and shear
Arch-shaped members are widely used for construction of tunnels, bridges, silos and shells. These members are not typically provided with transverse reinforcement and may thus have a brittle behaviour at failure. When subjected to bending or shear, traditional design methods used for straight members are not applicable due to deviation forces developing at the curved chords carrying compression...
متن کاملImproving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets
This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...
متن کاملShear Strength of Lightly Reinforced T-Beams in Negative Bending
Nine restrained T-beams were tested in a study of the negative moment region shear strength of lightly reinforced concrete T-beams. Variables included the longitudinal reinforcement ratio p, (0.47 percent and 0. 70 percent) and the nominal stirrup strength (0 to 84 psi [0 to 0.60 MPa]). The test results are compared with the shear provisions of "Building Code Requirements for Reinforced Concret...
متن کاملEnhancing Mechanical Strength of Inorganic Geopolymer by Using Phenol Resin
The effect of organic phenol on the compressive and flexural strength of a metakaolin based geopolymer is studied. It was found that 12 wt% phenol resins can increase the compressive and flexural strength by 30% and 65% respectively. In addition, the reinforcing effect of phenol resin is higher in Na-PS and Na-PSS type geopolymers rather than Na-PSDS. Two distinct endothermic peaks were detecte...
متن کاملForecasting of Shear Strength of Concrete Beam Reinforced with FRP Bar
This study develops a new approach for forecasting shear Strength of concrete beam without stirrups based on the artificial neural networks (ANN). Proposed ANN considers geometric and mechanical properties of cross section and FRP bars, and shear span-depth ratio. The ANN model is constructed from a set of experimental database available in the past literature. Efficiency of the ANN model was c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2016
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/149/1/012105