A Passive Network Synthesis from Two-Terminal Measured Impedance Characteristic

Two-dimensional measured laminations of positive Euler characteristic

Multimode vibration suppression with passive two-terminal distributed network incorporating piezoceramic transducers

The design of an inductance/capacitance two-terminal distributed passive electric network for simultaneously controlling several flexural modes of vibration is discussed. The efficiency of the network to annul multimode vibrations of simply supported, clamped–clamped and cantilever beams is demonstrated. 2004 Elsevier Ltd. All rights reserved.

Uncertainty Analysis in Two-terminal Impedance Measurements with Residual Correction

Residual impedance correction in impedance analyzers when using an asymmetrical test fixture needs three reference measurements, usually open circuit, short circuit, and load (meaning an impedance close to the impedance under test). This paper provides an uncertainty estimate for impedance measurements that apply a simple open/short correction in spite of using an asymmetrical test fixture. Exp...

Characteristic Impedance, Power, and Causality

A new causal power-normalized waveguide equivalent-circuit theory determines uniquely both the magnitude and phase of the characteristic impedance of a waveguide.

Periodically Variable Two-terminal Impedance Description and Measuring Methods

The subject of this paper is the problem how to describe and measure impedance of a linear periodically time-varying (LPTV) two-terminal. If the two-terminal parameters change synchronously to the supply the two-terminal is able to reach a periodical steady state, but supplied with a sinusoidal source produces a non-sinusoidal voltage or current. The LPTV system in the steady state may be descr...