A new shock tube configuration for studying dust-lifting during the initiation of a coal dust explosion

Airborne Dust Liberation During Coal Crushing

Explosion dust particle size measurements.

In situ measurements of the sizes and concentrations of dust particles generated by the detonation of high explosives in clay soil near Leesville, La., sandy clay soil near Huntsville, Ala., and sandy soils near Orogrande, N.M. are reported. Measurements were generally made within 1 m of the surface (in one case 10 m) at distances ranging from 10 to approximately 50 m from the detonation point ...

Equivalency of a personal dust monitor to the current United States coal mine respirable dust sampler.

The United States National Institute for Occupational Safety and Health, through an informal partnership with industry, labor, and the United States Mine Safety and Health Administration, has developed and tested a new instrument known as the Personal Dust Monitor (PDM). The new dust monitor is an integral part of the cap lamp that coal miners normally carry to work and provides continuous info...

Overall characterization of cork dust explosion.

Explosibility and ignitability studies of air/cork dust mixtures were conducted in a near-spherical 22.7 L explosibility test chamber using pyrotechnic ignitors and in a furnace of 1.23 L. The suspension dust burned as air-dispersed dust clouds and the uniformity of the dispersion inside the chamber was evaluated through optical dust probes. The range of tested particle sizes went from a mass m...

CFD Modelling of Nanoparticles Dispersion in a Dust Explosion Apparatus

CFD Modelling of Nanoparticles Dispersion in a Dust Explosion Apparatus Carlos Murillo, Olivier Dufaud, Omar López, Laurent Perrin, Alexis Vignes, Felipe Muñoz. Chemical Engineering Department, Universidad de los Andes, Colombia. Laboratoire des Sciences du Génie Chimique (LSGC), Nancy-Université, CNRS 1, rue Grandville, BP 20451, 54001 Nancy, France. Mechanical Engineering Department, Universi...