A FLEXURAL-DESIGN MODEL OF REINFORCED CONCRETE MEMBERS WITH SPANDREL- AND WING-WALLS
نویسندگان
چکیده
منابع مشابه
Shear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading
Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...
متن کاملExperimental Study on Seismic Performance of Reinforced Concrete Frame Columns Supported with Post-build Wing Walls
Abstract: Six specimens of concrete frame columns reinforced by post-build wing walls on the opposite faces were designed and fabricated to investigate their seismic performance. Axial compression ratio was considered as the critical factor and divided into 0.31, 0.36, and 0.40 before reinforcement. HRB400 steel grade was used to the longitudinal bar and the ratio of longitudinal reinforcement ...
متن کاملTopology Optimization of Strut-and-Tie Models in Non-Flexural Reinforced Concrete Members
This paper deals with the topology optimization of strut-and-tie models in non-flexural reinforced concrete members by using the Evolutionary Structural Optimization (ESO) method for plane stress continuum structures with displacement constraints. By means of systematically removing elements that have less contribution to the stiffness from the discritized concrete member, the actual load paths...
متن کاملA Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls
Architectural limitations in many situations make it necessary for the RC shear walls to be extended in plan in different directions at a single location that makes them a 3D configuration. Analysis of such walls is very challenging. In this research about 450 cases of 3D shear walls are considered with different shapes and heights. L, T and H-shape walls are studied. They are nonlinearly analy...
متن کاملApplication of Hydrophilic Silanol-Based Chemical Grout for Strengthening Damaged Reinforced Concrete Flexural Members
In this study, hydrophilic chemical grout using silanol (HCGS) was adopted to overcome the performance limitations of epoxy materials used for strengthening existing buildings and civil engineering structures. The enhanced material performances of HCGS were introduced, and applied to the section enlargement method, which is one of the typical structural strengthening methods used in practice. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2009
ISSN: 1881-8153,1340-4202
DOI: 10.3130/aijs.74.1321