3D printed elastomer ternary composites
نویسندگان
چکیده
This paper describes the 3D printing of a ternary composite polydimethylsiloxane (PDMS) and nanoparticles iron oxide barium titanate. The was printed using commercially available printer. Thermal curing during allowed for overall low process times few minutes. Scanning electron microscopy indicated uniform layers. resulting films showed ferromagnetic behaviour, applicability in magnetic actuation piezoelectric energy harvesting.
منابع مشابه
Fatigue Characterization of 3d Printed Elastomer Material
The Objet PolyJet 3D Printing process provides the ability to print graded materials featuring both stiff and elastomeric polymers. This capability allows for a variety of new design possibilities for additive manufacturing such as living hinges, shock absorbing casings, and integrated gaskets. Such design features typically rely upon the ability of traditional elastomers to experience large an...
متن کامل3D-Printed Autonomous Sensory Composites
DOI: 10.1002/admt.201600257 materials (solids, thin-films, and liquids) and functions into a single seamless autonomous sensory composite by avoiding the use of a premade substrate, and 3D-printing all required materials without any external processing. We present a monolithic integration of strain sensitive elements with an organic electrochemical transistor (OECT)based amplifier and an electr...
متن کاملAcoustic properties of 3D printed bio-degradable micro-perforated panels made of Corkwood Fiber-Reinforced composites
Introduction: Micro perforated panel (MPP) absorbents promise the next generation of sound absorbers as they have significant advantages over other porous adsorbents. In this study, we will investigate the acoustic performance of MPP absorbents made of biodegradable polylactic acid composite reinforced with natural corkwood fibers (PLA/Corkwood) by 3D printing technology. Material and Methods:...
متن کاملIonically Bonded Filler-Elastomer Composites*
Tertiary amine-modified corn starches were converted to their basic or hydroxide form and combined with carboxylated butadiene-acrylonitrile copolymer and butadiene-styrene-sulfonic acid polymer to produce ionically bonded filler-elastomer composites. An increasing percentage of the elastomer fraction in the starch-elastomer composite is insolubilized as the starch-to-elastomer ratio increases....
متن کاملMicrowave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
3D printing is used extensively in product prototyping and continues to emerge as a viable option for the direct manufacture of final parts. It is known that dielectric materials with relatively high real permittivity-which are required in important technology sectors such as electronics and communications-may be 3D printed using a variety of techniques. Among these, the fused deposition of pol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electronics Letters
سال: 2023
ISSN: ['0013-5194', '1350-911X']
DOI: https://doi.org/10.1049/ell2.12749