3D Geological Model for Zubair Reservoir in Abu-Amood Oil Field
نویسندگان
چکیده
The Zubair reservoir in the Abu-Amood field is considered a shaly sand south of Iraq. geological model created for identifying facies, distributing petrophysical properties and estimating volume hydrocarbon place. When data processing by Interactive Petrophysics (IP) software completed estimated permeability using hydraulic unit method then, three main steps are applied to build model, begins with creating structural, facies property models. five zones reservoirs were divided (three units two cap rocks) depending on variation (porosity permeability) that results from IP interpretation. Five wells penetrate lower Cretaceous Formation (Zubair reservoir) used construct model. ZUB-1 as most important zone which have good parameters about 24% porosity, 800 md permeability, 38% water saturation 85% net gross. initial oil place be 1.7898*109 STB. Finally, 3D support improving estimates potentialities enhances production field.
منابع مشابه
an application of equilibrium model for crude oil tanker ships insurance futures in iran
با توجه به تحریم های بین المملی علیه صنعت بیمه ایران امکان استفاده از بازارهای بین المملی بیمه ای برای نفتکش های ایرانی وجود ندارد. از طرفی از آنجایی که یکی از نوآوری های اخیر استفاده از بازارهای مالی به منظور ریسک های فاجعه آمیز می باشد. از اینرو در این پایان نامه سعی شده است با استفاده از این نوآوری ها با طراحی اوراق اختیارات راهی نو جهت بیمه گردن نفت کش های ایرانی ارائه نمود. از آنجایی که بر...
Determining Reservoir Potential in the Yaran Oil Field
Sarvak Formation as the oil reservoir with the most hydrocarbon potential in Yaran oil field is of special importance. The present research was conducted to study the reservoir parameters of this Formation. For this purpose, petro-physical crude data was first prepared and using the Geolog6.7 software, a petro physical plot was drawn. Afterward, petro-physical properties of reservoir were done ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Investigation of Hydrogen Sulfide Oil Pollution Source: Asmari Oil Reservoir of Marun Oil Field in the Southwest of Iran
متن کامل
3d Geological Mapping: an Inescapable Evolution for National Geological Surveys
According to EuroGeoSurveys, the European Geological Surveys association, “Geological spatial data and models describe the solid Earth’s surface and subsurface on-shore and off-shore, its nature, structure, properties, dynamics and evolution over time; including its related (geo)resources and (geo) hazards”. This illustrates a modern vision of the core mission that National Geological Surveys h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Iraqi geological journal
سال: 2023
ISSN: ['2414-6064', '2663-8754']
DOI: https://doi.org/10.46717/igj.56.1b.4ms-2023-2-12