30 dB microstrip coupler with high directivity
نویسندگان
چکیده
منابع مشابه
High Directivity Microstrip Coupler Using Variable Width Structure
A method to improve the directivity of the microstrip coupler is presented. The width of the coupler is modified for phase velocity compensation which results in high directivity. Using this procedure, a 15 dB coupler is designed and simulated at 0.9 GHz using SONNET software. A high directivity of 46 dB is obtained. The validity of the design concept is verified and compared with conventional ...
متن کاملHigh directivity DGS-based coupler
Taylor & Francis makes every effort to ensure the accuracy of all the information (the “Content”) contained in the publications on our platform. However, Taylor & Francis, our agents, and our licensors make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opin...
متن کاملMicrostrip Coupler with High Isolation
A method to improve the isolation of the microstrip coupler is presented. The pattern of the coupler is modified for phase velocity compensation which results in high isolation. Using this procedure, a 15 dB coupler is designed and fabricated at 0.9 GHz. A high isolation of 63.3 dB is measured. The validity of the design concept is verified by simulations and measurements.
متن کاملDesign and Simulation of Microstrip Directional Coupler with Tight Structure and High Directivity*
The design of Cyclotron CYCHU-10 has been carried out at Huazhong University of Science and Technology (HUST). Because of the low centre frequency (99MHz) of its RF system, we should choose suitable directional couplers for the RF system which is supposed to be highdirectivity and tight-structure. This paper analyzes and synthesizes kinds of directional couplers, especially microstrip structure...
متن کاملWideband Multilayer Directional Coupler with Tight Coupling and High Directivity
A novel, wideband, symmetrical, printed directional coupler is described, which has tight coupling and high directivity. The coupler consists of four interconnected strips printed in two layers. The dimensions of the strips are optimized to minimize the dispersion of propagating modes. Design data are provided for some typical practical cases. The theoretical results are verified experimentally...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainable Engineering and Innovation
سال: 2020
ISSN: 2712-0562
DOI: 10.37868/sei.v2i1.40