Polypropylene/wood flour composites were melting compounded in an internal mixer at 190°C and 60 rpm rotor speed and then samples were fabricated by injection molding. Effects wood flour content on the physical properties of composites was investigated. For this purpose, hardness, water absorption and thickness swelling of samples was determined at different levels of wood flour content. The re...

Soda lignin was divided into two fractions with different molecular weights by methanol extraction. Lignin amine was synthesized from the low-molecular-weight lignin fraction via Mannich reaction and was used for interfacial modification of poly-(vinylchloride) (PVC)/wood-flour composites. The PVC/wood-flour composites were prepared from surface-treated wood flour and PVC by melt compounding. T...

This study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. The resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. But by increasingof fire retar...

Polylactide (PLA)/wood flour composite foam were prepared through a batch foaming process. The effect of the chain extender on the crystallization behavior and dynamic rheological properties of the PLA/wood flour composites were investigated as well as the crystal structure and cell morphology of the composite foams. The incorporation of the chain extender enhanced the complex viscosity and sto...

Research on wood-flour-filled polypropylene has primarily focused on one species of wood flour and one or two broad particle-size distributions. To fully exploit the use of wood flour as a filler, the effects of species and particle size need to be examined. This study focused on the effects of both of these variables on the properties of polypropylene filled with wood flour. To examine the eff...

Wood-based materials are used extensively in residual construction worldwide. Most of the adhesives used in wood-based materials are derived from fossil resources, and some are not environmentally friendly. This study explores nanofiber technology as an alternative to such adhesives. Previous studies have shown that the three-dimensional binding effects of cellulose nanofiber (CNF), when mixed ...

A lignin-epoxy resin composite was prepared by blending lignin/wood flour with an epoxy resin and polyamine. The effects of the wood flour on the mechanical, thermal creep, and creep recovery properties, as well as the microstructure of the composite, were studied. Among the mechanical properties, the initial modulus increased with increasing content of wood flour. The glass transition temperat...

The effect of wood flour and coupling agent content on the hygroscopic thickness swelling rate of polypropylene composites was investigated in this study. To meet this objective, the wood flour was compounded with polypropylene and coupling agent in an internal mixer; then the samples were fabricated by injection molding. The concentration was varied from 40 to 60% for wood flour and from 0 to ...

the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

The main objective of this study was to determine the mold resistance and mechanical properties of fungicide-treated wood and bamboo flour/high density polyethylene (HDPE) composites. Zinc borate (ZB), 4,5-dichloro2-octyl-isothiazolone (DCOIT), zinc pyrithione (ZPT), and carbendazim (MBC) were used as fungicides. Then, treated and untreated samples were exposed to mold fungi (Aspergillus niger,...