The rheological regulation of the “three high” (high temperature, high density and high salinity) water-based drilling fluid is a worldwide problem due to the combined influence of temperature, solid content and salinity. This paper investigates the factors and regulation methods about rheological property of “three high” water based drilling fluid, and the effects of clay, salinity and weighti...

water soluble amphoteric graft copolymers of polysaccharide were synthesized via grafting of cationic monomer onto the sodium carboxymethylcellulose ()cmc)( and then used as a shale stabilizer in the water-based drilling fluids. accordingly, five types of cmc-graft copolymers with different ratios of acrylamide am)( and diallyldimethylammonium chloride dadmac)( were synthesized. grafting of mon...

increasing the thermal stability and resistance to bacterial attack (bioresistance) of the potato starch used in the water-based drilling fluid is the aim of this work. four types of potato starch grafted with acrylamide and a mixture of each one with acrylic acid, 2-acrylamido-2-methyl-1-propane sulfuric acid and itaconic acid were synthesized by manganese (iv)-induced redox system at the suit...

A gas kick simulation model for deep-water horizontal well with diesel-based drilling fluid is presented in this paper. This model is mainly based on the mass, momentum, and energy conservation equations. The unique aspect of this model is the fluid-gas coupling and the change of mud properties after the gas influx from the formation. The simulation results show that the gas in an annulus disso...

designing drilling fluids for drilling in deep gas reservoirs and geothermal wells is a majorchallenge. cooling drilling fluids and preparing stable mud with high thermal conductivity are ofgreat concern. drilling nanofluids, i.e. a low fraction of carbon nanotube (cnt) well dispersed inmud, may enhance the mixture thermal conductivity compared to the base fluids. thus, they arepotentially usef...

Designing drilling fluids for drilling in deep gas reservoirs and geothermal wells is a major challenge. Cooling drilling fluids and preparing stable mud with high thermal conductivity are of great concern. Drilling nanofluids, i.e. a low fraction of carbon nanotube (CNT) well dispersed in mud, may enhance the mixture thermal conductivity compared to the base fluids. Thus, they are potentially ...

   Drilling fluids are an essential component of the rotary drilling process used to drill for oil and gas on land and offshore environments. The injection of this nano particle into drilling fluid increases the viscosity levels fluids. In these experiments, the rheological properties of the fluid including apparent viscosity (AV), plastic viscosity (PV), yielding point (YP), mud c...

Oil and gas drilling operations use drilling fluids (mud) to lubricate the drill bit and stem, transport formation cuttings to the surface, and seal off porous geologic formations. Following completion of the well, waste drilling fluid is often applied to cropland. We studied potential changes in soil compaction as indicated by cone penetration resistance, pH, electrical conductivity (EC(e)), s...

drilling fluid is the most important lifeline of the drilling operation, that main task is facilitate the cuttings removal of the drilling. there are varieties of drilling fluids such as sodium bentonite based-drilling fluid is called “mud” and drilling foam or surfactant based-drilling fluid is called “soap”. the present work aims are study on the modified drilling mud properties by using the ...

Fluid invasion from water-based drilling mud (WBDM) into the shale formations causes swelling, high pressure zone near the wellbore wall, and eventually wellbore instability problems during drilling operations. For the stability of the wellbore, physical plugging of nanoscale pore throats could be considered as a logical approach toward avoiding the fluid invasion into the shale formation. This...