thin-walled hollow steel columns, either circular or box shaped, are commonly used as piers in bridges. recent earthquakes, e.g. hyogoken-nanbu or kobe 1995, on the other hand have shown that these columns are vulnerable to damage when subjected to earthquake loading. this paper presents a new innovative thin-walled hollow steel column fabricated of corrugated plates, “thin-walled steel columns...

Thin-walled hollow steel columns, either circular or box shaped, are commonly used as piers in bridges. Recent earthquakes, e.g. Hyogoken-Nanbu or Kobe 1995, on the other hand have shown that these columns are vulnerable to damage when subjected to earthquake loading. This paper presents a new innovative thin-walled hollow steel column fabricated of corrugated plates, “thin-walled steel columns...

This paper is concerned with the inelastic behavior of axially loaded concrete-filled thin-walled steel tubular columns subjected to local buckling. A nonlinear fiber element analysis program accounting for local buckling effects is developed for predicting the ultimate strength and ductility of concrete-filled thin-walled steel tubular columns. The effects of local buckling are taken into cons...

in order to lighten the prestressed concrete solid members, nowadays, it is possible to make use of the advantage of hpc (fc'>60 mpa) as well as replacing the solid section with a psc thin-walled section for certain members such as circular and box columns. using the strength theory of aci, a numerical procedure along with a computer program was developed for the analysis of such sections ...

This paper studies the post-local buckling behaviour of steel plates in concrete-filled thin-walled steel tubular columns under biaxial loading using the finite element method. Geometric and material nonlinear finite element analyses are undertaken to investigate the post-local buckling strengths of imperfect steel plates under stress gradients. Based on the results obtained from the nonlinear ...

Current design practice of concrete-filled steel tube (CFST) columns uses different formulas for different section profiles to predict the axial load bearing capacity. It has always been a challenge and practically important issue for researchers and design engineers who want to find a unified formula that can be used in the design of the columns with various sections, including solid, hollow, ...

This paper presents the difference in behavior between hollow-core fiber reinforced polymer-concrete-steel (HC-FCS) columns and conventional reinforced concrete (RC) columns under vehicle collision in terms of dynamic and static forces. The HC-FCS column consisted of an outer FRP tube, an inner steel tube, and a concrete shell sandwiched between the two tubes. The steel tube was hollow inside a...

Open cross-section, thin-walled, cold-formed steel columns have at least three competing buckling modes: local, distortional, and Euler ~i.e., flexural or flexural-torsional! buckling. Closed-form prediction of the buckling stress in the local mode, including interaction of the connected elements, and the distortional mode, including consideration of the elastic and geometric stiffness at the w...

For some electrostatic precipitators, profiled steel sheets are used as casing wall which is subjected to both bending and vertical compression. By nonlinear finite element method, the influences of structural parameters on load bearing capacity of profiled steel sheet wall were investigated. For the loading path, the uniform transversal pressure was applied firstly, and then the vertical compr...

Concrete-filled composite elements have recently gained popularity as beams and columns all over the world. They advantages similar to reinforced concrete elements, such moulding process lack of maintenance filled concrete, well hollow steel enhancing compressive strength bending capacity by using smaller sections. In this paper, buckling behaviour thin-walled with circular cross-section differ...