the aim of this work is to synthesize and investigate the performance of yttria-doped zirconia solgelcoatings in the chemical corrosion prevention of zircaloy-4 (zirconium alloy) in a 1 n h2so4environment. the influence of four different molar ratios of water to alkoxide, namely 1, 4, 12, and20, on the coating quality and its corrosion prevention performance was investigated. differentialtherma...

The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...

Yttria-stabilized zirconia (YSZ) is of interest to the aerospace community, notably for its application as a thermal barrier coating for turbine engine components. In such an application, diffusion of both oxygen ions and cations is of concern. Oxygen diffusion can lead to deterioration of a coated part, and often necessitates an environmental barrier coating. Cation diffusion in YSZ is much sl...

Functionally graded NiCoCrAlY/yttria-stabilized zirconia coatings were fabricated by plasma spraying using mechanically alloyed, plasma-spheroidized NiCoCrAlY/yttria-stabilized zirconia (YSZ) composite powders. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS) analysis revealed that oxidation of aluminum, chromium and yttrium in the NiCoCrAlY alloy occurred in th...

Tribological coatings of yttria stabilized zirconia (YSZ), gold, diamond like carbon (DLC) and MoS2 were synthesized using magnetron assisted pulsed laser deposition (MSPLD). The coatings were synthesized in four-component and three-component combinations that included YSZ/Au/DLC/MoS2, YSZ/Au/MoS2, and YSZ/Au/DLC. A range of coating compositions was studied to explore coating optimization for l...

Thermal Barrier Coatings are subjected to spallation and destabilization due to hot corrosion.Recently, Ceria Stabilized Zirconia (CSZ)-based TBCs have been intensively investigated for the YSZreplacement because CSZ has a much lower thermal conductivity and a higher expected thermalexpansion coefficient than those of YSZ. In this research, Yttria stabilized zirconia (YSZ) andceria stabilized z...

Yttria-stabilized zirconia (YSZ) has been used as a thermal/environmental barrier coating for gas turbine engine blades. Current methods of fabrication include air plasma spraying (APS) and electron-beam physical vapor deposition (EB-PVD). The APS technique results in a coating that loses effectiveness with thermal cycling. The EB-PVD technique deposits a columnar microstructure which accommoda...

In this study, small fraction of NiTi (5 wt%) was added to Yttria stabilized zirconia (YSZ) top coat to improve it sliding wear resistance. The measurement of width of wear tracks after wear tests under a 15 N load for 100 m sliding distances showed that the width of wear track in NiTi-YSZ coating is shorter than that in YSZ coating which depicts the higher wear resistance of NiTi-YSZ coa...

Yttria-stabilized zirconia (YSZ)-based thermal barrier coating (TBC) has been integrated with thermographic phosphors through air plasma spray (APS) for in-depth; non-contact temperature sensing. This coating consisted of a thin layer of Dy-doped YSZ (about 40 µm) on the bottom and a regular YSZ layer with a thickness up to 300 µm on top. A measurement system has been established; which include...