in  this paper  thin  films of  tin sulfide (sns) were deposited on  the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. in  this work  the characteristic of sns  thin  films  investigated. the xrd pattern and optical transmittance of thin films also are discussed. with the change in concen...

Thin film solar cells have reached commercial maturity and extraordinarily high efficiency that make them competitive even with the cheaper Chinese crystalline silicon modules. However, some issues (connected with presence of toxic and/or rare elements) are still limiting their market diffusion. For this reason new thin film materials, such as Cu2ZnSnS4 or SnS, have been introduced so that expe...

Thin film tin sulphide (SnS) films were produced with grain sizes greater than 1 μm using a one-step metal organic chemical vapour deposition process. Tin-doped indium oxide (ITO) was used as the substrate, having a similar work function to molybdenum typically used as the back contact, but with potential use of its transparency for bifacial illumination. Tetraethyltin and ditertiarybutylsulphi...

Polycrystalline SnS thin films were grown on glass substrates using a novel procedure involving a chemical reaction between the precursor species evaporated simultaneously. This is a relatively new material, which exhibits excellent properties to be used as absorbent layer in solar cells. X-ray diffraction (XRD) measurements indicate that the synthesized samples grow in several phases (SnS, SnS...

Novel materials suitable for optoelectronics are of great interest due to limited and diminishing energy resources and the movement toward a green earth. We report a simple film growth method to tune the S composition, x from 1 to 2 in semiconductor ultrathin SnSx films on quartz substrates, that is, single phase SnS, single phase SnS2, and mixed phases of both SnS and SnS2 by varying the sulfu...

Thin films of tin sulfide (SnS) were prepared by thermal evaporation technique on glass substrates and on n-type Si substrate and their physical properties were studied. The phase of the obtained thin films before and after thermal treatment was confirmed by X-ray diffraction analysis and Raman spectra. Optical transmission and reflection spectra were measured in the wavelength range 300-1800 n...

In  this paper  thin  films of  tin sulfide (SnS) were deposited on  the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In  this work  the characteristic of SnS  thin  films  investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...

Thin film solar cells made from earth-abundant, non-toxic materials are needed to replace the current technology that uses Cu(In,Ga)(S,Se)2 and CdTe, which contain scarce and toxic elements. One promising candidate absorber material is tin monosulfide (SnS). In this report, pure, stoichiometric, single-phase SnS films were obtained by atomic layer deposition (ALD) using the reaction of bis(N,N’...