The objective of the present study was to evaluate the effect of sintering condition on matrix formation and subsequent drug release from polymer matrix tablet for controlled release. The present study highlights the use of a microwave oven for the sintering process in order to achieve more uniform heat distribution with reduction in time required for sintering. We could achieve effective sinte...

A computer model for the sintering of ceramic/polymer composite materials has been established based on empirical sintering rate data. The model calculates sintering depths which result from variations in the operating parameters which include laser power, beam speed, scan spacing, scan vector length, and initial temperatures of the powder and surroundings. Sintering depths measured in multiple...

We present fast sintering for silver (Ag) nanoparticle (NP) and flake layers printed using roll-to-roll (R2R) gravure printing. An infrared (IR) sintering module was applied to an R2R system to shorten the sintering duration of an R2R gravure-printed Ag layer. IR sintering of the conductive layer was improved by optimising the process condition. After printing of the Ag NP and Ag flake layers, ...

This paper describes thermoelectric properties of La-doped SrTiO3 prepared by using a combination of combustion synthesis (CS) with post spark plasma sintering (SPS), on which effects of sintering temperature were mainly examined. In experimental, combustion-synthesized (CSed) samples (Sr1 xLaxTiO3, x 1⁄4 0:08) were spark-plasma-sintered (SPSed) at temperatures from 1513 to 1663K and the thermo...

the fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. porous nanocrystalline strontium-doped lanthanum manganite la0.8sr0.2mno3 (lsm) cathode materials were prepared by mechanochemical route in various grinding times. carbon black was employed to produce pores. the formation of lsm single phase was studied by x-ray ...

In the present paper the sintering behavior of 3 mol% yttria-stabilized zirconia (3Y-TZP) with and without small amount (0.2 wt %) of SiO2 additive was investigated. It has been studied the silica impact which was added in two ways (co-precipitation and mechanical mixing) on sintering kinetics of 3Y-TZP nanopowders at the initial sintering stage. It was found the silica additive leads to the ch...

Nanoparticles have been an area of active research in recent years due to their properties, which can be greatly different from the bulk. In this work, we study the sintering of TiO2 nanoparticles using molecular dynamics simulations. Such sintering occurs in flame reactors where nanotitania is prepared via the chloride process. Decrease in free energy due to reduction in surface area is the ma...

In this study, synchrotron radiation computed tomography was applied to investigate the mechanisms of titanium powder microwave sintering in situ. On the basis of reconstructed images, we observed that the sintering described in this study differs from conventional sintering in terms of particle smoothing, rounding, and short-term growth. Contacted particles were also isolated. The kinetic curv...

The laser sintering process of multi-component powder W/Cu is simulated by ANSYS software based on the factors of radiation, convection and thermal physical parameters on temperature. The laser power and scanning velocity which are the key process parameters to affect directly in sintering molding are studied in paper. The results show that when the scanning velocity is constant, the sintering ...

Until 2000 almost all research in the microwave sintering area was confined to non-metallic materials. However, after the first report by Penn State in 1999 on full sintering of steel powders in microwave, now in the last few years there has been increasing interest in applying microwave energy for processing of variety of metallic materials. The present study is an extension of this work and r...