in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

asymmetric polyethersulfone (pes) microfiltration flat sheet membranes were composed by the phase inversion method (pim) and were used as supports. composite membranes were fabricated by coating silicone rubber as selective layer. effect of different concentrations of pes and pdms and different solvent such as nmp, dmf and dms effects as pes solvents and support thickness and different coagulat...

thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...

this is an original study on the effect of a polyisobutylene – polydimethylsiloxane (pibpdms) block copolymer modifier used as an interfacial active agent on the dynamics behaviour of single newtonian drops suspended in a polyisobutylene (pib) newtonian matrix. the results were divided in two sections. the first part included the experiments carried out on the non-modified and 2% block cop...

objective: the objective of this study was to investigate the invitro fluoride release of four new self-adhesive resin cements; set (sdi, australia), breeze (pentron, usa), embrace wetbond (pulpdent, usa), g-cem (gc, japan) and to assess the bonding performance of these self-adhesive resin cements for bonding of orthodontic brackets. materials and methods: for fluoride release experiment, six ...

1. to determine whether difference in birth body mass influenced growth performance in pipistrellus kuhlii we studied a total of 12 captive-born neonates. bats were assigned to two body mass groups: light birth body mass (lbw: 0.89 ± 0.05, n=8) and heavy birth body mass (hbw: 1.35 ± 0.08, n=4). heavier body mass at birth was associated with rapid postnatal growth (body mass and forearm length) ...

seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...

asymmetric membranes are widely used in many industrial membrane separation processes. the major advantage of membrane filtration over the conventional process is its ability to remove a wider spectrum of particles without using any chemicals. hollow fiber configuration offer many advantages over flat-sheet or tubular membranes. the spinning process of hollow fiber may look simple, yet it is te...

iv abstract this study examined the linguistic behaviors of two iranian efl teachers each of them teaching learners of two similar proficiency levels, a beginner level and an intermediate level, to investigate the relationship between the learners proficiency levels and the amounts and purposes for l1 use by the two teachers. the study was carried out to investigate whether there were differe...